Re: [PATCH v3] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts

[Geert Uytterhoeven]

On Tue, Feb 13, 2024 at 9:59 AM Prabhakar <prabhakar.csengg@xxxxxxxxx> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
> supported by the IRQC block, reflect the same in DT binding doc.
>
> - R9A07G043U              - RZ/G2UL
> - R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
> - R9A07G054               - RZ/V2L
> - R9A08G045               - RZ/G3S
>
> For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
> interrupt so we just use the below to represent them:
> - ec7tie1-0
> - ec7tie2-0
> - ec7tiovf-0
>
> Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
> were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
> SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
> support these interrupts. Therefore, mark the 'interrupt-names' property
> as required for all the SoCs and update the example node in the binding
> document.
>
> Fixes: 96fed779d3d4 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
> Fixes: 1cf0697a24ef ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v2 -> v3:
> - Fixed IRQ description as pointed by Geert
> - Sending this individual patch as DTSI patches have been Reviewed by Geert

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68korg

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds