[PATCH v2 3/6] dt-bindings: net: remove outdated hisilicon-femac

[Yang Xiwen via B4 Relay]

From: Yang Xiwen <forbidden405@xxxxxxxxxxx>

The user documented(Hi3516) is not found in current kernel anymore. And
it seems this SoC has been EOL for a long time. While at it, Remove this
binding entirely due to recent driver changes.

Signed-off-by: Yang Xiwen <forbidden405@xxxxxxxxxxx>
---
 .../devicetree/bindings/net/hisilicon-femac.txt    | 41 ----------------------
 1 file changed, 41 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac.txt b/Documentation/devicetree/bindings/net/hisilicon-femac.txt
deleted file mode 100644
index 5f96976f3cea..000000000000
--- a/Documentation/devicetree/bindings/net/hisilicon-femac.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Hisilicon Fast Ethernet MAC controller
-
-Required properties:
-- compatible: should contain one of the following version strings:
-	* "hisilicon,hisi-femac-v1"
-	* "hisilicon,hisi-femac-v2"
-	and the soc string "hisilicon,hi3516cv300-femac".
-- reg: specifies base physical address(s) and size of the device registers.
-  The first region is the MAC core register base and size.
-  The second region is the global MAC control register.
-- interrupts: should contain the MAC interrupt.
-- clocks: A phandle to the MAC main clock.
-- resets: should contain the phandle to the MAC reset signal(required) and
-	the PHY reset signal(optional).
-- reset-names: should contain the reset signal name "mac"(required)
-	and "phy"(optional).
-- phy-mode: see ethernet.txt [1].
-- phy-handle: see ethernet.txt [1].
-- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
-	The 1st cell is reset pre-delay in micro seconds.
-	The 2nd cell is reset pulse in micro seconds.
-	The 3rd cell is reset post-delay in micro seconds.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt[1].
-
-[1] Documentation/devicetree/bindings/net/ethernet.txt
-
-Example:
-	hisi_femac: ethernet@10090000 {
-		compatible = "hisilicon,hi3516cv300-femac","hisilicon,hisi-femac-v2";
-		reg = <0x10090000 0x1000>,<0x10091300 0x200>;
-		interrupts = <12>;
-		clocks = <&crg HI3518EV200_ETH_CLK>;
-		resets = <&crg 0xec 0>,<&crg 0xec 3>;
-		reset-names = "mac","phy";
-		mac-address = [00 00 00 00 00 00];
-		phy-mode = "mii";
-		phy-handle = <&phy0>;
-		hisilicon,phy-reset-delays-us = <10000 20000 20000>;
-	};

-- 
2.43.0