Re: [RESEND Patch v13 1/3] media: dt-bindings: media: add bindings for Rockchip CIF

[Sakari Ailus]

Hi Mehdi,

On Tue, Feb 20, 2024 at 06:04:10PM +0100, Mehdi Djait wrote:
> Hi Sakari,
> 
> Thank you for the review.

You're welcome!

> 
> On Tue, Feb 13, 2024 at 12:04:58PM +0000, Sakari Ailus wrote:
> > Hi Mehdi,
> > 
> > Thanks for the patchset.
> > 
> > On Sun, Feb 11, 2024 at 08:03:30PM +0100, Mehdi Djait wrote:
> > > From: Mehdi Djait <mehdi.djait@xxxxxxxxxxx>
> > > 
> > > Add a documentation for the Rockchip Camera Interface binding.
> > > 
> > > Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> > > Reviewed-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
> > > Signed-off-by: Mehdi Djait <mehdi.djait@xxxxxxxxxxx>
> > > Signed-off-by: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
> > > ---
> > >  .../bindings/media/rockchip,px30-vip.yaml     | 123 ++++++++++++++++++
> > >  1 file changed, 123 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> > > new file mode 100644
> > > index 000000000000..6af4a9b6774a
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> > > @@ -0,0 +1,123 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/rockchip,px30-vip.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Rockchip Camera Interface (CIF)
> > > +
> > > +maintainers:
> > > +  - Mehdi Djait <mehdi.djait@xxxxxxxxxxx>
> > > +
> > > +description:
> > > +  CIF is a camera interface present on some Rockchip SoCs. It receives the data
> > > +  from Camera sensor or CCIR656 encoder and transfers it into system main memory
> > > +  by AXI bus.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: rockchip,px30-vip
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: ACLK
> > > +      - description: HCLK
> > > +      - description: PCLK
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: aclk
> > > +      - const: hclk
> > > +      - const: pclk
> > > +
> > > +  resets:
> > > +    items:
> > > +      - description: AXI
> > > +      - description: AHB
> > > +      - description: PCLK IN
> > > +
> > > +  reset-names:
> > > +    items:
> > > +      - const: axi
> > > +      - const: ahb
> > > +      - const: pclkin
> > > +
> > > +  power-domains:
> > > +    maxItems: 1
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > > +        unevaluatedProperties: false
> > > +        description: input port on the parallel interface
> > > +
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: video-interfaces.yaml#
> > > +            unevaluatedProperties: false
> > > +
> > > +            properties:
> > > +              bus-type:
> > > +                enum: [5, 6]
> > > +
> > > +            required:
> > > +              - bus-type
> > 
> > What about the vsync-active, hsync-active and data-active properties?
> > Aren't they relevant for this device? Are there default values? This should
> > be part of the bindings for the device, shouldn't it?
> > 
> 
> From what I gathered from the Rockchip PX30 TRM and the other
> available documents from Rockchip, I will add the following:
> 
> diff --git a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> index 6af4a9b6774a..6920b0cb0507 100644
> --- a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> +++ b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
> @@ -69,6 +69,14 @@ properties:
>                bus-type:
>                  enum: [5, 6]
>  
> +              hsync-active:
> +                enum: [0, 1]
> +                default: 1
> +
> +              vsync-active:
> +                enum: [0, 1]
> +                default: 0

I'd use the same default for both, whether it's 0 or 1.

> +
> 
> @dt-maintainers, @Conor does this warrant a drop of the reviewed-by tags
> in the V14 ?
> 

-- 
Regards,

Sakari Ailus