[PATCH 3/4] dt-bindings: iio: humidity: hdc3020: add reset-gpios

[Javier Carrasco]

The HDC3020 provides an active low reset signal that is still not
described in the bindings.

Add reset-gpios to the bindings and the example.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
index 8b5dedd1a598..b375d307513f 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -34,6 +34,9 @@ properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -43,6 +46,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
@@ -54,5 +58,6 @@ examples:
             vdd-supply = <&vcc_3v3>;
             interrupt-parent = <&gpio3>;
             interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
         };
     };

-- 
2.40.1