[PATCH v4 2/3] phy: qcom: edp: Move v4 specific settings to version ops
From: Abel Vesa
Date: Tue Feb 20 2024 - 17:06:20 EST
In order to support different HW versions move everything specific
to v4 into so-called version ops.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 183 +++++++++++++++++++++++-------------
1 file changed, 118 insertions(+), 65 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 621d0453bf76..9bbf977c7b4e 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -77,9 +77,20 @@ struct qcom_edp_swing_pre_emph_cfg {
const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
};
+struct qcom_edp;
+
+struct phy_ver_ops {
+ int (*com_power_on)(const struct qcom_edp *edp);
+ int (*com_resetsm_cntrl)(const struct qcom_edp *edp);
+ int (*com_bias_en_clkbuflr)(const struct qcom_edp *edp);
+ int (*com_configure_pll)(const struct qcom_edp *edp);
+ int (*com_configure_ssc)(const struct qcom_edp *edp);
+};
+
struct qcom_edp_phy_cfg {
bool is_edp;
const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg;
+ const struct phy_ver_ops *ver_ops;
};
struct qcom_edp {
@@ -174,18 +185,6 @@ static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = {
.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
};
-static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
-};
-
-static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
- .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
-};
-
-static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
- .is_edp = true,
- .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
-};
-
static int qcom_edp_phy_init(struct phy *phy)
{
struct qcom_edp *edp = phy_get_drvdata(phy);
@@ -204,8 +203,9 @@ static int qcom_edp_phy_init(struct phy *phy)
DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
edp->edp + DP_PHY_PD_CTL);
- /* Turn on BIAS current for PHY/PLL */
- writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+ ret = edp->cfg->ver_ops->com_bias_en_clkbuflr(edp);
+ if (ret)
+ return ret;
writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
msleep(20);
@@ -312,6 +312,84 @@ static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opt
}
static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
+{
+ return edp->cfg->ver_ops->com_configure_ssc(edp);
+}
+
+static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+{
+ return edp->cfg->ver_ops->com_configure_pll(edp);
+}
+
+static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 vco_div;
+
+ switch (dp_opts->link_rate) {
+ case 1620:
+ vco_div = 0x1;
+ *pixel_freq = 1620000000UL / 2;
+ break;
+
+ case 2700:
+ vco_div = 0x1;
+ *pixel_freq = 2700000000UL / 2;
+ break;
+
+ case 5400:
+ vco_div = 0x2;
+ *pixel_freq = 5400000000UL / 4;
+ break;
+
+ case 8100:
+ vco_div = 0x0;
+ *pixel_freq = 8100000000UL / 6;
+ break;
+
+ default:
+ /* Other link rates aren't supported */
+ return -EINVAL;
+ }
+
+ writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+ return 0;
+}
+
+static int qcom_edp_phy_power_on_v4(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+ DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+ DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+ edp->edp + DP_PHY_PD_CTL);
+ writel(0xfc, edp->edp + DP_PHY_MODE);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+ val, val & BIT(7), 5, 200);
+}
+
+static int qcom_edp_phy_com_resetsm_cntrl_v4(const struct qcom_edp *edp)
+{
+ u32 val;
+
+ writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+ return readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+ val, val & BIT(0), 500, 10000);
+}
+
+static int qcom_edp_com_bias_en_clkbuflr_v4(const struct qcom_edp *edp)
+{
+ /* Turn on BIAS current for PHY/PLL */
+ writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+ return 0;
+}
+
+static int qcom_edp_com_configure_ssc_v4(const struct qcom_edp *edp)
{
const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
u32 step1;
@@ -345,7 +423,7 @@ static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
return 0;
}
-static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp)
{
const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
u32 div_frac_start2_mode0;
@@ -431,41 +509,28 @@ static int qcom_edp_configure_pll(const struct qcom_edp *edp)
return 0;
}
-static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
-{
- const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
- u32 vco_div;
-
- switch (dp_opts->link_rate) {
- case 1620:
- vco_div = 0x1;
- *pixel_freq = 1620000000UL / 2;
- break;
-
- case 2700:
- vco_div = 0x1;
- *pixel_freq = 2700000000UL / 2;
- break;
-
- case 5400:
- vco_div = 0x2;
- *pixel_freq = 5400000000UL / 4;
- break;
-
- case 8100:
- vco_div = 0x0;
- *pixel_freq = 8100000000UL / 6;
- break;
+static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
+ .com_power_on = qcom_edp_phy_power_on_v4,
+ .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4,
+ .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v4,
+ .com_configure_pll = qcom_edp_com_configure_pll_v4,
+ .com_configure_ssc = qcom_edp_com_configure_ssc_v4,
+};
- default:
- /* Other link rates aren't supported */
- return -EINVAL;
- }
+static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
- writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
+ .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
- return 0;
-}
+static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = {
+ .is_edp = true,
+ .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg,
+ .ver_ops = &qcom_edp_phy_ops_v4,
+};
static int qcom_edp_phy_power_on(struct phy *phy)
{
@@ -473,22 +538,13 @@ static int qcom_edp_phy_power_on(struct phy *phy)
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
unsigned long pixel_freq;
u8 ldo_config = 0x0;
- int timeout;
int ret;
u32 val;
u8 cfg1;
- writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
- DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
- DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
- edp->edp + DP_PHY_PD_CTL);
- writel(0xfc, edp->edp + DP_PHY_MODE);
-
- timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
- val, val & BIT(7), 5, 200);
- if (timeout)
- return timeout;
-
+ ret = edp->cfg->ver_ops->com_power_on(edp);
+ if (ret)
+ return ret;
if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
ldo_config = 0x1;
@@ -535,12 +591,9 @@ static int qcom_edp_phy_power_on(struct phy *phy)
writel(0x01, edp->edp + DP_PHY_CFG);
writel(0x09, edp->edp + DP_PHY_CFG);
- writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
-
- timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
- val, val & BIT(0), 500, 10000);
- if (timeout)
- return timeout;
+ ret = edp->cfg->ver_ops->com_resetsm_cntrl(edp);
+ if (ret)
+ return ret;
writel(0x19, edp->edp + DP_PHY_CFG);
writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
--
2.34.1