Re: [PATCH 09/21] arm64: dts: qcom: sc8280xp: Add PCIe bridge node

[Manivannan Sadhasivam]

On Wed, Feb 21, 2024 at 01:39:01PM +0100, Konrad Dybcio wrote:
> On 21.02.2024 04:41, Manivannan Sadhasivam wrote:
> > On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
> > for each controller instance. Hence, add a node to represent the bridge.
> > 
> > While at it, let's remove the bridge properties from board dts as they are
> > now redundant.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > ---
> >  .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     |  8 -----
> >  arch/arm64/boot/dts/qcom/sc8280xp.dtsi             | 40 ++++++++++++++++++++++
> >  2 files changed, 40 insertions(+), 8 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > index def3976bd5bb..f0a0115e08fa 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > @@ -733,14 +733,6 @@ &pcie4 {
> >  	status = "okay";
> >  
> >  	pcie@0 {
> > -		device_type = "pci";
> > -		reg = <0x0 0x0 0x0 0x0 0x0>;
> > -		#address-cells = <3>;
> > -		#size-cells = <2>;
> > -		ranges;
> > -
> > -		bus-range = <0x01 0xff>;
> > -
> >  		wifi@0 {
> 
> This doesn't seem right, pleas use a label
> 

Why? A node label is useful if we want to reference it at the root level in
board dts, but here it is not.

- Mani

-- 
மணிவண்ணன் சதாசிவம்