Re: [PATCH v7 02/12] firmware: qcom: scm: enable the TZ mem allocator

[Bartosz Golaszewski]

On Wed, Feb 21, 2024 at 7:39 PM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> On Sun, Feb 18, 2024 at 4:25 AM Bjorn Andersson <andersson@kernelorg> wrote:
> >
> > On Mon, Feb 05, 2024 at 07:28:00PM +0100, Bartosz Golaszewski wrote:
> > > From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > >
> > > Select the TrustZone memory allocator in Kconfig and create a pool of
> > > memory shareable with the TrustZone when probing the SCM driver.
> > >
> > > This will allow a gradual conversion of all relevant SCM calls to using
> > > the dedicated allocator.
> > >
> > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> > > Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> > > Tested-by: Andrew Halaney <ahalaney@xxxxxxxxxx> # sc8280xp-lenovo-thinkpad-x13s
> > > Tested-by: Deepti Jaggi <quic_djaggi@xxxxxxxxxxx> #sa8775p-ride
> > > Reviewed-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
> > > ---
> > >  drivers/firmware/qcom/Kconfig    |  1 +
> > >  drivers/firmware/qcom/qcom_scm.c | 16 ++++++++++++++++
> > >  2 files changed, 17 insertions(+)
> > >
> > > diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig
> > > index f18686edf415..d24d83223867 100644
> > > --- a/drivers/firmware/qcom/Kconfig
> > > +++ b/drivers/firmware/qcom/Kconfig
> > > @@ -7,6 +7,7 @@
> > >  menu "Qualcomm firmware drivers"
> > >
> > >  config QCOM_SCM
> > > +     select QCOM_TZMEM
> > >       tristate
> > >
> > >  config QCOM_TZMEM
> > > diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> > > index 520de9b5633a..0d4c028be0c1 100644
> > > --- a/drivers/firmware/qcom/qcom_scm.c
> > > +++ b/drivers/firmware/qcom/qcom_scm.c
> > > @@ -8,8 +8,10 @@
> > >  #include <linux/completion.h>
> > >  #include <linux/cpumask.h>
> > >  #include <linux/dma-mapping.h>
> > > +#include <linux/err.h>
> > >  #include <linux/export.h>
> > >  #include <linux/firmware/qcom/qcom_scm.h>
> > > +#include <linux/firmware/qcom/qcom_tzmem.h>
> > >  #include <linux/init.h>
> > >  #include <linux/interconnect.h>
> > >  #include <linux/interrupt.h>
> > > @@ -20,9 +22,11 @@
> > >  #include <linux/of_platform.h>
> > >  #include <linux/platform_device.h>
> > >  #include <linux/reset-controller.h>
> > > +#include <linux/sizes.h>
> > >  #include <linux/types.h>
> > >
> > >  #include "qcom_scm.h"
> > > +#include "qcom_tzmem.h"
> > >
> > >  static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
> > >  module_param(download_mode, bool, 0);
> > > @@ -41,6 +45,8 @@ struct qcom_scm {
> > >       int scm_vote_count;
> > >
> > >       u64 dload_mode_addr;
> > > +
> > > +     struct qcom_tzmem_pool *mempool;
> > >  };
> > >
> > >  struct qcom_scm_current_perm_info {
> > > @@ -1887,6 +1893,16 @@ static int qcom_scm_probe(struct platform_device *pdev)
> > >       if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled"))
> > >               qcom_scm_disable_sdi();
> > >
> > > +     ret = qcom_tzmem_enable(__scm->dev);
> > > +     if (ret)
> > > +             return dev_err_probe(__scm->dev, ret,
> > > +                                  "Failed to enable the TrustZone memory allocator\n");
> > > +
> > > +     __scm->mempool = devm_qcom_tzmem_pool_new(__scm->dev, SZ_256K);
> >
> > As we're not moving from the callers freely allocating what they need,
> > to a fixed sized pool of 256kb. Please document why 256kb was choosen,
> > so that we have something to fall back on when someone runs out of this
> > space, or wonders "why not 128kb?".
> >
>
> If you worry about these pools being taken out of the total memory and
> prefer to have a way to avoid it, I was thinking about another
> build-time mode for the allocator - one where there's no pool but it
> just allocates chunks using dma_alloc_coherent() like before and pool
> size is ignored. Does it sound good?
>

Or we could even have an argument for the initial size of the pool and
then once it's exhausted, we'd add a new chunk (maybe twice the size?)
and so on.

Bart

> Bart
>
> > Regards,
> > Bjorn
> >
> > > +     if (IS_ERR(__scm->mempool))
> > > +             return dev_err_probe(__scm->dev, PTR_ERR(__scm->mempool),
> > > +                                  "Failed to create the SCM memory pool\n");
> > > +
> > >       /*
> > >        * Initialize the QSEECOM interface.
> > >        *
> > > --
> > > 2.40.1
> > >