Re: [PATCH net-next 2/3] net: phy: dp83826: Add support for phy-mode configuration

[Maxime Chevallier]

Hello Jérémie,

On Thu, 22 Feb 2024 11:31:16 +0100
Jérémie Dautheribes <jeremie.dautheribes@xxxxxxxxxxx> wrote:

> The TI DP83826 PHY can operate in either MII mode or RMII mode.
> By default, it is configured by straps.
> It can also be configured by writing to the bit 5 of register 0x17 - RMII
> and Status Register (RCSR).
> 
> When phydev->interface is rmii, rmii mode must be enabled, otherwise
> mii mode must be set.
> This prevents misconfiguration of hw straps.
> 
> Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlincom>

This looks good to me,

Reviewed-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>