Re: [PATCH v5 1/4] arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node

[Devarsh Thakkar]

Hi Brandon,

On 21/02/24 00:44, Brandon Brnich wrote:
> This patch adds support for the Wave521cl on the J784S4-evm.
> 
> Signed-off-by: Brandon Brnich <b-brnich@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 16 ++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index f2b720ed1e4f..40dd2e8a9f98 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -662,6 +662,22 @@ main_i2c6: i2c@2060000 {
>  		status = "disabled";
>  	};
>  
> +	vpu0: video-codec@4210000 {
> +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> +		reg = <0x00 0x4210000 0x00 0x10000>;
> +		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&k3_clks 241 2>;
> +		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
> +	};
> +
> +	vpu1: video-codec@4220000 {
> +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> +		reg = <0x00 0x4220000 0x00 0x10000>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&k3_clks 242 2>;
> +		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
> +	};
> +
>  	main_sdhci0: mmc@4f80000 {
>  		compatible = "ti,j721e-sdhci-8bit";
>  		reg = <0x00 0x04f80000 0x00 0x1000>,
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> index 4398c3a463e1..2f633721a0c6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> @@ -235,6 +235,8 @@ cbass_main: bus@100000 {
>  		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
>  			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
>  			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
> +			 <0x00 0x04210000 0x00 0x04210000 0x00 0x00010000>, /* VPU0 */
> +			 <0x00 0x04220000 0x00 0x04220000 0x00 0x00010000>, /* VPU1 */

Above change seems not required as the /* Most peripherals */ range already
covers it. Also thanks to Vignesh for confirming this.

As this is already merged in tree, Could you please send a patch which fixes
this commit ?

Regards
Devarsh

>  			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
>  			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
>  			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
>