Re: [PATCH] Convert the Imagination Technologies SPDIF Input Controllerto DT schema.

[Krzysztof Kozlowski]

On 27/02/2024 13:35, Javier García wrote:
> Convert the Imagination Technologies SPDIF Input Controllerto DT schema.
> 
> Signed-off-by: Javier García <javier.garcia.ta@xxxxxxxx>
> ---
>  .../bindings/sound/img,spdif-in.txt           | 41 ----------
>  .../bindings/sound/img,spdif-in.yaml          | 80 +++++++++++++++++++

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

Also no need for full stop in subject.

>  2 files changed, 80 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/img,spdif-in.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/img,spdif-in.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt
> deleted file mode 100644
> index f7ea8c87bf34..000000000000
> --- a/Documentation/devicetree/bindings/sound/img,spdif-in.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@

..

> diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.yaml b/Documentation/devicetree/bindings/sound/img,spdif-in.yaml
> new file mode 100644
> index 000000000000..d201293d63c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/img,spdif-in.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/img,spdif-in.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Imagination Technologies SPDIF Input Controller
> +
> +maintainers:
> +  - Rob Herring <robh+dt@xxxxxxxxxx>
> +  - Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>

No, unfortunately this cannot be us. Choose someone responsible for
hardware or Linux drivers at least.

> +
> +properties:
> +  compatible:
> +    enum:
> +      - img,spdif-in
> +
> +  reg:
> +    description:
> +      Offset and length of the register set for the device.

Drop description

> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  dmas:
> +    maxItems: 1
> +
> +  dma-names:
> +    items:
> +      - const: rx
> +
> +  clocks:
> +    items:
> +      - description: The system clock
> +
> +  clock-names:
> +    items:
> +      - const: sys
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +  resets:
> +    items:
> +      - description: Should contain a phandle to the spdif in reset signal, if any

Drop description, it's useless. You don't say anything valuable here.
Just maxItems: 1


> +
> +  reset-names:
> +    items:
> +      - const: rst
> +
> +required:
> +  - compatible
> +  - reg
> +  - dmas
> +  - dma-names
> +  - clocks
> +  - clock-names
> +  - '#sound-dai-cells'
> +
> +unevaluatedProperties: false

This alone does not make sense... so it is pointing you to missing $ref
for dai-common.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/pistachio-clk.h>
> +    #include <dt-bindings/gpio/gpio.h>

What for?

> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/mips-gic.h>
> +    #include <dt-bindings/reset/pistachio-resets.h>

That's not used, so just add resets and reset-names.

> +    spdif_in: spdif-in@18100e00 {
> +        compatible = "img,spdif-in";
> +        reg = <0x18100E00 0x100>;

Lowercase hex

> +        interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
> +        dmas = <&mdc 15 0xffffffff 0>;
> +        dma-names = "rx";
> +        clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
> +        clock-names = "sys";
> +
> +        #sound-dai-cells = <0>;
> +    };

Best regards,
Krzysztof