[PATCH net-next 0/2] net: phy: qcom: qca808x: fill in possible_interfaces

[Robert Marko]

QCA808x does not currently fill in the possible_interfaces.

This leads to Phylink not being aware that it supports 2500Base-X as well
so in cases where it is connected to a DSA switch like MV88E6393 it will
limit that port to phy-mode set in the DTS.

That means that if SGMII is used you are limited to 1G only while if
2500Base-X was set you are limited to 2.5G only.

Populating the possible_interfaces fixes this.

Robert Marko (2):
  net: phy: qcom: qca808x: add helper for checking for 1G only model
  net: phy: qcom: qca808x: fill in possible_interfaces

 drivers/net/phy/qcom/qca808x.c | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

-- 
2.43.2