[PATCH md-6.9 v3 02/11] md/raid1: factor out helpers to add rdev to conf

[Yu Kuai]

From: Yu Kuai <yukuai3@xxxxxxxxxx>

There are no functional changes, just make code cleaner and prepare to
record disk non-rotational information while adding and removing rdev to
conf

Signed-off-by: Yu Kuai <yukuai3@xxxxxxxxxx>
---
 drivers/md/raid1.c | 74 ++++++++++++++++++++++++++++------------------
 1 file changed, 46 insertions(+), 28 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a145fe48b9ce..1940ff398c23 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1757,6 +1757,40 @@ static int raid1_spare_active(struct mddev *mddev)
 	return count;
 }
 
+static bool raid1_add_conf(struct r1conf *conf, struct md_rdev *rdev, int disk)
+{
+	struct raid1_info *info = conf->mirrors + disk;
+
+	if (info->rdev)
+		return false;
+
+	rdev->raid_disk = disk;
+	info->head_position = 0;
+	info->seq_start = MaxSector;
+	WRITE_ONCE(info->rdev, rdev);
+
+	return true;
+}
+
+static bool raid1_remove_conf(struct r1conf *conf, int disk)
+{
+	struct raid1_info *info = conf->mirrors + disk;
+	struct md_rdev *rdev = info->rdev;
+
+	if (!rdev || test_bit(In_sync, &rdev->flags) ||
+	    atomic_read(&rdev->nr_pending))
+		return false;
+
+	/* Only remove non-faulty devices if recovery is not possible. */
+	if (!test_bit(Faulty, &rdev->flags) &&
+	    rdev->mddev->recovery_disabled != conf->recovery_disabled &&
+	    rdev->mddev->degraded < conf->raid_disks)
+		return false;
+
+	WRITE_ONCE(info->rdev, NULL);
+	return true;
+}
+
 static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 {
 	struct r1conf *conf = mddev->private;
@@ -1792,15 +1826,13 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 				disk_stack_limits(mddev->gendisk, rdev->bdev,
 						  rdev->data_offset << 9);
 
-			p->head_position = 0;
-			rdev->raid_disk = mirror;
+			raid1_add_conf(conf, rdev, mirror);
 			err = 0;
 			/* As all devices are equivalent, we don't need a full recovery
 			 * if this was recently any drive of the array
 			 */
 			if (rdev->saved_raid_disk < 0)
 				conf->fullsync = 1;
-			WRITE_ONCE(p->rdev, rdev);
 			break;
 		}
 		if (test_bit(WantReplacement, &p->rdev->flags) &&
@@ -1810,13 +1842,11 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 
 	if (err && repl_slot >= 0) {
 		/* Add this device as a replacement */
-		p = conf->mirrors + repl_slot;
 		clear_bit(In_sync, &rdev->flags);
 		set_bit(Replacement, &rdev->flags);
-		rdev->raid_disk = repl_slot;
+		raid1_add_conf(conf, rdev, repl_slot);
 		err = 0;
 		conf->fullsync = 1;
-		WRITE_ONCE(p[conf->raid_disks].rdev, rdev);
 	}
 
 	print_conf(conf);
@@ -1833,27 +1863,20 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 	if (unlikely(number >= conf->raid_disks))
 		goto abort;
 
-	if (rdev != p->rdev)
-		p = conf->mirrors + conf->raid_disks + number;
+	if (rdev != p->rdev) {
+		number += conf->raid_disks;
+		p = conf->mirrors + number;
+	}
 
 	print_conf(conf);
 	if (rdev == p->rdev) {
-		if (test_bit(In_sync, &rdev->flags) ||
-		    atomic_read(&rdev->nr_pending)) {
-			err = -EBUSY;
-			goto abort;
-		}
-		/* Only remove non-faulty devices if recovery
-		 * is not possible.
-		 */
-		if (!test_bit(Faulty, &rdev->flags) &&
-		    mddev->recovery_disabled != conf->recovery_disabled &&
-		    mddev->degraded < conf->raid_disks) {
+		if (!raid1_remove_conf(conf, number)) {
 			err = -EBUSY;
 			goto abort;
 		}
-		WRITE_ONCE(p->rdev, NULL);
-		if (conf->mirrors[conf->raid_disks + number].rdev) {
+
+		if (number < conf->raid_disks &&
+		    conf->mirrors[conf->raid_disks + number].rdev) {
 			/* We just removed a device that is being replaced.
 			 * Move down the replacement.  We drain all IO before
 			 * doing this to avoid confusion.
@@ -3000,15 +3023,10 @@ static struct r1conf *setup_conf(struct mddev *mddev)
 		    || disk_idx < 0)
 			continue;
 		if (test_bit(Replacement, &rdev->flags))
-			disk = conf->mirrors + mddev->raid_disks + disk_idx;
-		else
-			disk = conf->mirrors + disk_idx;
+			disk_idx += mddev->raid_disks;
 
-		if (disk->rdev)
+		if (!raid1_add_conf(conf, rdev, disk_idx))
 			goto abort;
-		disk->rdev = rdev;
-		disk->head_position = 0;
-		disk->seq_start = MaxSector;
 	}
 	conf->raid_disks = mddev->raid_disks;
 	conf->mddev = mddev;
-- 
2.39.2