[PATCH 2/4] arm64: dts: imx8dxl: add lpuart device in cm40 subsystem

[Frank Li]

From: Alice Guo <alice.guo@xxxxxxx>

Adding lpuart device in cm40 subsystem.

Signed-off-by: Alice Guo <alice.guo@xxxxxxx>
Reviewed-by: Peng Fan <peng.fan@xxxxxxx>
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
index b1d626862ddf8..ecca5ada224b7 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-cm40.dtsi
@@ -64,4 +64,29 @@ cm40_intmux: intmux@37400000 {
 		power-domains = <&pd IMX_SC_R_M4_0_INTMUX>;
 		status = "disabled";
 	};
+
+	cm40_lpuart: serial@37220000 {
+		compatible = "fsl,imx8qxp-lpuart";
+		reg = <0x37220000 0x1000>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&cm40_intmux>;
+		clocks = <&cm40_uart_lpcg 1>, <&cm40_uart_lpcg 0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+		status = "disabled";
+	};
+
+	cm40_uart_lpcg: clock-controller@37620000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x37620000 0x1000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_M4_0_UART IMX_SC_PM_CLK_PER>,
+			 <&cm40_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>;
+		clock-output-names = "cm40_lpcg_uart_clk",
+				     "cm40_lpcg_uart_ipg_clk";
+		power-domains = <&pd IMX_SC_R_M4_0_UART>;
+	};
 };

-- 
2.34.1