Re: [PATCH net-next v2 2/2] net: phy: micrel: lan8814 cable improvement errata

[Wojciech Drewek]

On 29.02.2024 20:52, Horatiu Vultur wrote:
> When the length of the cable is more than 100m and the lan8814 is
> configured to run in 1000Base-T Slave then the register of the device
> needs to be optimized.
> 
> Workaround this by setting the measure time to a value of 0xb. This
> value can be set regardless of the configuration.
> 
> This issue is described in 'LAN8814 Silicon Errata and Data Sheet
> Clarification' and according to that, this will not be corrected in a
> future silicon revision.
> 
> Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> ---

Reviewed-by: Wojciech Drewek <wojciech.drewek@xxxxxxxxx>

>  drivers/net/phy/micrel.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 88cc03982bb78..788fdd54fd22d 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -117,6 +117,10 @@
>  #define LAN8814_EEE_STATE			0x38
>  #define LAN8814_EEE_STATE_MASK2P5P		BIT(10)
>  
> +#define LAN8814_PD_CONTROLS			0x9d
> +#define LAN8814_PD_CONTROLS_PD_MEAS_TIME_MASK_	GENMASK(3, 0)
> +#define LAN8814_PD_CONTROLS_PD_MEAS_TIME_VAL_	0xb
> +
>  /* Represents 1ppm adjustment in 2^32 format with
>   * each nsec contains 4 clock cycles.
>   * The value is calculated as following: (1/1000000)/((2^-32)/4)
> @@ -3304,6 +3308,20 @@ static void lan8814_clear_2psp_bit(struct phy_device *phydev)
>  	lanphy_write_page_reg(phydev, 2, LAN8814_EEE_STATE, val);
>  }
>  
> +static void lan8814_update_meas_time(struct phy_device *phydev)
> +{
> +	u16 val;
> +
> +	/* By setting the measure time to a value of 0xb this will allow cables
> +	 * longer than 100m to be used. This configuration can be used
> +	 * regardless of the mode of operation of the PHY
> +	 */
> +	val = lanphy_read_page_reg(phydev, 1, LAN8814_PD_CONTROLS);
> +	val &= ~LAN8814_PD_CONTROLS_PD_MEAS_TIME_MASK_;
> +	val |= LAN8814_PD_CONTROLS_PD_MEAS_TIME_VAL_;
> +	lanphy_write_page_reg(phydev, 1, LAN8814_PD_CONTROLS, val);
> +}
> +
>  static int lan8814_probe(struct phy_device *phydev)
>  {
>  	const struct kszphy_type *type = phydev->drv->driver_data;
> @@ -3342,6 +3360,7 @@ static int lan8814_probe(struct phy_device *phydev)
>  
>  	/* Errata workarounds */
>  	lan8814_clear_2psp_bit(phydev);
> +	lan8814_update_meas_time(phydev);
>  
>  	return 0;
>  }