[PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support

[Stefan Eichenberger]

From: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>

This patch series adds support for sleep-moci to the Verdin AM62 in
combination with the Dahlia carrier board. sleep-moci is a GPIO that
allows the system on module to turn off regulators that are not needed
in suspend mode on the carrier board.

Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove
peer-hub as requirement") from linux-next is needed to make DTB_CHECK
pass without peer-hub set for the hub on the usb1 interface.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@xxxxxxxxxxx>

Stefan Eichenberger (2):
  arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
  arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci

 .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi    | 22 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi    | 24 ++++++++++++-------
 2 files changed, 38 insertions(+), 8 deletions(-)

-- 
2.40.1