[RESEND, PATCH 3/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function

[Jason-JH . Lin]

Add cmdq_pkt_poll_addr function to support CMDQ user making
an instruction for polling a specific address of hardware rigster
to check the value with or without mask.

POLL is an old operation in GCE, so it does not support SPR and
CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
to move polling register address to GPR to make an instruction.
This will be done in cmdq_pkt_poll_addr().

Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 38 ++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
 2 files changed, 54 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 3a1e47ad8a41..2e9fc9bb1183 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -12,6 +12,7 @@
 
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_POLL_ENABLE_MASK	BIT(0)
+#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_REG_TYPE		1
 #define CMDQ_JUMP_RELATIVE	1
@@ -406,6 +407,43 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_poll_mask);
 
+int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
+{
+	struct cmdq_instruction inst = { {0} };
+	int err;
+	u8 use_mask = 0;
+
+	if (mask != U32_MAX) {
+		inst.op = CMDQ_CODE_MASK;
+		inst.mask = ~mask;
+		err = cmdq_pkt_append_command(pkt, inst);
+		if (err != 0)
+			return err;
+		use_mask = CMDQ_POLL_ENABLE_MASK;
+	}
+
+	/*
+	 * POLL is an old operation in GCE and it does not support SPR and CMDQ_CODE_LOGIC,
+	 * so it can not use cmdq_pkt_assign to keep polling register address to SPR.
+	 * It needs to use GPR and CMDQ_CODE_MASK to move polling register address to GPR.
+	 */
+	inst.op = CMDQ_CODE_MASK;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
+	inst.mask = addr;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.op = CMDQ_CODE_POLL;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
+	inst.offset = use_mask;
+	inst.value = value;
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_poll_addr);
+
 int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
 {
 	struct cmdq_instruction inst = {};
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index b6dbe2d8f16a..2fe9be240fbc 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -253,6 +253,22 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
 int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 		       u16 offset, u32 value, u32 mask);
 
+/**
+ * cmdq_pkt_poll_addr() - Append polling command to the CMDQ packet, ask GCE to
+ *			 execute an instruction that wait for a specified
+ *			 address of hardware register to check for the value
+ *			 w/ or w/o mask.
+ *			 All GCE hardware threads will be blocked by this
+ *			 instruction.
+ * @pkt:	the CMDQ packet
+ * @addr:	the hardware register address
+ * @value:	the specified target register value
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask);
+
 /**
  * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
  *		       to execute an instruction that set a constant value into
-- 
2.18.0