[PATCH] arm64: dts: imx8mp-beacon-kit: Fix errors found from CHECK_DTBS

[Adam Ford]

The adv7535 has some extra reg-name which can be removed since
the defaults that are used when these are not assigned work
just fine.  Removing them and adding some required regulators
make the errors detected from CHECK_DTBS go away.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
Requires: https://patchwork.kernel.org/project/linux-arm-kernel/patch/20240305004859.201085-2-aford173@xxxxxxxxx/

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index fba8fd04398d..b1cd0f0b9c13 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -302,12 +302,19 @@ pca6416_3: gpio@20 {
 
 	adv_bridge: hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		reg-names = "main";
 		interrupt-parent = <&gpio4>;
 		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
+		avdd-supply = <&buck5>;
+		dvdd-supply = <&buck5>;
+		pvdd-supply = <&buck5>;
+		a2vdd-supply = <&buck5>;
+		v1p2-supply = <&buck5>;
+		v3p3-supply = <&buck4>;
+
 
 		ports {
 			#address-cells = <1>;
-- 
2.43.0