Re: [PATCH v4] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons

[Konrad Dybcio]

On 3/4/24 08:09, Hui Liu via B4 Relay wrote:
> From: Hui Liu <quic_huliu@xxxxxxxxxxx>
>
> The Volume Down & Power buttons are controlled by the PMIC via
> the PON hardware, and the Volume Up is connected to a PMIC gpio.
>
> Enable the necessary hardware and setup the GPIO state for the
> Volume Up gpio key.
>
> Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
> ---

[...]


> +&pmk8350_pon {
> +	status = "okay";
> +};

This device is already enabled

Konrad