[PATCH 1/5] ARM: dts: qcom: msm8974pro-castor: Clean up formatting
From: Luca Weiss
Date: Tue Mar 05 2024 - 18:27:28 EST
Clean up some easy things do prepare the dts for further changes.
* Move pinctrl-names below pinctrl-*
* Move status as last property
* Remove default linux,input-type value
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
.../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 65 +++++++++-------------
1 file changed, 27 insertions(+), 38 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index ee94741a26ed..2db2ddf00580 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -23,34 +23,30 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
+ pinctrl-names = "default";
key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
};
@@ -67,8 +63,8 @@ vreg_bl_vddio: lcd-backlight-vddio {
vin-supply = <&pm8941_s3>;
startup-delay-us = <70000>;
- pinctrl-names = "default";
pinctrl-0 = <&lcd_backlight_en_pin_a>;
+ pinctrl-names = "default";
};
vreg_vsp: lcd-dcdc-regulator {
@@ -80,8 +76,8 @@ vreg_vsp: lcd-dcdc-regulator {
gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
- pinctrl-names = "default";
pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+ pinctrl-names = "default";
};
vreg_boost: vreg-boost {
@@ -121,8 +117,8 @@ vreg_wlan: wlan-regulator {
gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
- pinctrl-names = "default";
pinctrl-0 = <&wlan_regulator_pin>;
+ pinctrl-names = "default";
};
};
@@ -131,9 +127,10 @@ &blsp1_uart2 {
};
&blsp2_i2c2 {
- status = "okay";
clock-frequency = <355000>;
+ status = "okay";
+
synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
@@ -147,8 +144,8 @@ synaptics@2c {
vdd-supply = <&pm8941_l22>;
vio-supply = <&pm8941_lvs3>;
- pinctrl-names = "default";
pinctrl-0 = <&ts_int_pin>;
+ pinctrl-names = "default";
syna,startup-delay-ms = <100>;
@@ -166,9 +163,10 @@ rmi4-f11@11 {
};
&blsp2_i2c5 {
- status = "okay";
clock-frequency = <355000>;
+ status = "okay";
+
lp8566_wled: backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;
@@ -232,8 +230,8 @@ bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
- pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+ pinctrl-names = "default";
host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
@@ -242,17 +240,16 @@ bluetooth {
};
&pm8941_coincell {
- status = "okay";
-
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
+
+ status = "okay";
};
&pm8941_gpios {
gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio5";
function = "normal";
-
bias-pull-up;
power-source = <PM8941_GPIO_S3>;
};
@@ -260,7 +257,6 @@ gpio_keys_pin_a: gpio-keys-active-state {
bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
-
output-low;
power-source = <PM8941_GPIO_S3>;
};
@@ -268,7 +264,6 @@ bt_reg_on_pin: bt-reg-on-state {
wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
-
output-high;
power-source = <PM8941_GPIO_S3>;
};
@@ -276,7 +271,6 @@ wlan_sleep_clk_pin: wl-sleep-clk-state {
wlan_regulator_pin: wl-reg-active-state {
pins = "gpio18";
function = "normal";
-
bias-disable;
power-source = <PM8941_GPIO_S3>;
};
@@ -284,20 +278,18 @@ wlan_regulator_pin: wl-reg-active-state {
lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
pins = "gpio20";
function = "normal";
-
bias-disable;
power-source = <PM8941_GPIO_S3>;
input-disable;
output-low;
};
-
};
&pm8941_lpg {
- status = "okay";
-
qcom,power-source = <1>;
+ status = "okay";
+
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
@@ -530,41 +522,38 @@ pm8941_l24: l24 {
};
&sdhc_1 {
- status = "okay";
-
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_on>;
pinctrl-1 = <&sdc1_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
};
&sdhc_2 {
- status = "okay";
-
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
};
&sdhc_3 {
- status = "okay";
-
max-frequency = <100000000>;
vmmc-supply = <&vreg_wlan>;
non-removable;
- pinctrl-names = "default";
pinctrl-0 = <&sdc3_on>;
+ pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
+ status = "okay";
bcrmf@1 {
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
@@ -572,8 +561,8 @@ bcrmf@1 {
brcm,drive-strength = <10>;
- pinctrl-names = "default";
pinctrl-0 = <&wlan_sleep_clk_pin>;
+ pinctrl-names = "default";
};
};
@@ -682,8 +671,6 @@ bt_dev_wake_pin: bt-dev-wake-state {
};
&usb {
- status = "okay";
-
phys = <&usb_hs1_phy>;
phy-select = <&tcsr 0xb000 0>;
extcon = <&smbb>, <&usb_id>;
@@ -692,14 +679,16 @@ &usb {
hnp-disable;
srp-disable;
adp-disable;
+
+ status = "okay";
};
&usb_hs1_phy {
- status = "okay";
-
v1p8-supply = <&pm8941_l6>;
v3p3-supply = <&pm8941_l24>;
extcon = <&smbb>;
qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+ status = "okay";
};
--
2.44.0