[PATCH net v3 0/2] net: fec: Fixes to suspend / resume with mac_managed_pm

[John Ernberg]

Since the introduction of mac_managed_pm in the FEC driver there were some
discrepancies regarding power management of the PHY.

This failed on our board that has a permanently powered Microchip LAN8700R
attached to the FEC. Although the root cause of the failure can be traced
back to f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO
with polled IO") and probably even before that, we only started noticing
the problem going from 5.10 to 6.1.

Since 557d5dc83f68 ("net: fec: use mac-managed PHY PM") is actually a fix
to most of the power management sequencing problems that came with power
managing the MDIO bus which for the FEC meant adding a race with FEC
resume (and phy_start() if netif was running) and PHY resume.

That it worked before for us was probably just luck...

Thanks to Wei's response to my report at [1] I was able to pick up his
patch and start honing in on the remaining missing details.

[1]: https://lore.kernel.org/netdev/1f45bdbe-eab1-4e59-8f24-add177590d27@xxxxxxxx/

v3:
 - Implement feedback from Wei Fang for patch 2
 - Fixes tag in patch 2 dropped, should it be delayed for net-next now?

v2: https://lore.kernel.org/netdev/20240229105256.2903095-1-john.ernberg@xxxxxxxx/
 - Completely different approach that should be much more correct
   (Wei Fang, Jakub Kicinski)
 - Re-target to net tree, because I have fixes tags now

v1: https://lore.kernel.org/netdev/20240212105010.2258421-1-john.ernberg@xxxxxxxx/

John Ernberg (1):
  net: fec: Suspend the PHY on probe

Wei Fang (1):
  net: fec: Set mac_managed_pm during probe

 drivers/net/ethernet/freescale/fec_main.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

-- 
2.43.0