Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask

From: Sean Anderson
Date: Mon Mar 18 2024 - 11:19:42 EST


On 3/16/24 09:36, Jonathan Cameron wrote:
> On Fri, 15 Mar 2024 13:47:40 -0400
> Sean Anderson <sean.anderson@xxxxxxxxx> wrote:
>
>> Hi Conall,
>>
>> On 3/15/24 09:18, O'Griofa, Conall wrote:
>> > [AMD Official Use Only - General]
>> >
>> > Hi,
>> >
>> > I think there was a fix for this issue applied to the version that was running on 5.15 that didn't seem to make it into the upstream driver.
>> > Please see link for reference https://github.com/Xilinx/linux-xlnx/commit/608426961f16ab149b1b699f1c35f7ad244c0720
>> >
>> > I think a similar fix to the above patch is may be beneficial?
>>
>> These patches look functionally identical to me.
>
> Because there are no channels with scan index between
> 22 * 2 + 16 (that patch) and 22 * 3 (your patch) that is
> the effect is indeed the same. But given the issues is the
> 64 limit on maximum scan index, 22 * 3 = 66 is an ugly value
> to compare with.
>
> I'm still very against the use of scan_index for anything other
> than scan indices (which is why partly how this bug wasn't noticed
> in the first palce). So the check should be scan_index != -1
> and uses of those values elsewhere in the driver should be fixed
> (which looks simple to do from a quick glance at the code).

OK, so how do the sysfs files get named then?

--Sean

>>
>> --Sean
>>
>> >> -----Original Message-----
>> >> From: Sean Anderson <sean.anderson@xxxxxxxxx>
>> >> Sent: Thursday, March 14, 2024 5:30 PM
>> >> To: Jonathan Cameron <jic23@xxxxxxxxxx>
>> >> Cc: linux-iio@xxxxxxxxxxxxxxx; O'Griofa, Conall <conall.ogriofa@xxxxxxx>;
>> >> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Lars-Peter
>> >> Clausen <lars@xxxxxxxxxx>
>> >> Subject: Re: [PATCH] iio: xilinx-ams: Don't include ams_ctrl_channels in
>> >> scan_mask
>> >>
>> >> Caution: This message originated from an External Source. Use proper caution
>> >> when opening attachments, clicking links, or responding.
>> >>
>> >>
>> >> On 3/14/24 11:48, Jonathan Cameron wrote:
>> >> > On Mon, 11 Mar 2024 12:28:00 -0400
>> >> > Sean Anderson <sean.anderson@xxxxxxxxx> wrote:
>> >> >
>> >> >> ams_enable_channel_sequence constructs a "scan_mask" for all the PS
>> >> >> and PL channels. This works out fine, since scan_index for these
>> >> >> channels is less than 64. However, it also includes the
>> >> >> ams_ctrl_channels, where scan_index is greater than 64, triggering
>> >> >> undefined behavior. Since we don't need these channels anyway, just
>> >> exclude them.
>> >> >>
>> >> >> Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
>> >> >> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxxx>
>> >> >
>> >> > Hi Sean,
>> >> >
>> >> > I'd ideally like to understand why we have channels with such large
>> >> > scan indexes. Those values should only be used for buffered capture.
>> >> > It feels like they are being abused here. Can we set them to -1
>> >> > instead and check based on that?
>> >> > For a channel, a scan index of -1 means it can't be captured via the
>> >> > buffered interfaces but only accessed via sysfs reads.
>> >> > I think that's what we have here?
>> >>
>> >> From what I can tell, none of the channels support buffered reads. And we can't
>> >> naïvely convert the scan_index to -1, since that causes sysfs naming conflicts
>> >> (not to mention the compatibility break).
>> >>
>> >> >
>> >> > I just feel like if we leave these as things stand, we will get bitten
>> >> > by similar bugs in the future. At least with -1 it should be obvious why!
>> >>
>> >> There are just as likely to be bugs confusing the PL/PS subdevices...
>> >>
>> >> FWIW I had no trouble identifying the channels involved with this bug.
>> >>
>> >> --Sean
>> >>
>> >> > Jonathan
>> >> >
>> >> >
>> >> >> ---
>> >> >>
>> >> >> drivers/iio/adc/xilinx-ams.c | 8 ++++++--
>> >> >> 1 file changed, 6 insertions(+), 2 deletions(-)
>> >> >>
>> >> >> diff --git a/drivers/iio/adc/xilinx-ams.c
>> >> >> b/drivers/iio/adc/xilinx-ams.c index a55396c1f8b2..4de7ce598e4d
>> >> >> 100644
>> >> >> --- a/drivers/iio/adc/xilinx-ams.c
>> >> >> +++ b/drivers/iio/adc/xilinx-ams.c
>> >> >> @@ -414,8 +414,12 @@ static void ams_enable_channel_sequence(struct
>> >> >> iio_dev *indio_dev)
>> >> >>
>> >> >> /* Run calibration of PS & PL as part of the sequence */
>> >> >> scan_mask = BIT(0) | BIT(AMS_PS_SEQ_MAX);
>> >> >> - for (i = 0; i < indio_dev->num_channels; i++)
>> >> >> - scan_mask |= BIT_ULL(indio_dev->channels[i].scan_index);
>> >> >> + for (i = 0; i < indio_dev->num_channels; i++) {
>> >> >> + const struct iio_chan_spec *chan =
>> >> >> + &indio_dev->channels[i];
>> >> >> +
>> >> >> + if (chan->scan_index < AMS_CTRL_SEQ_BASE)
>> >> >> + scan_mask |= BIT_ULL(chan->scan_index);
>> >> >> + }
>> >> >>
>> >> >> if (ams->ps_base) {
>> >> >> /* put sysmon in a soft reset to change the sequence */
>> >> >
>>
>