Re: [PATCH] drm/dp: Clarify that wait_hpd_asserted() is not optional for panels
From: Dmitry Baryshkov
Date: Tue Mar 19 2024 - 16:55:22 EST
On Tue, 19 Mar 2024 at 22:39, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 3/19/2024 1:16 PM, Dmitry Baryshkov wrote:
> > On Tue, 19 Mar 2024 at 21:02, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 3/19/2024 11:35 AM, Dmitry Baryshkov wrote:
> >>> On Tue, 19 Mar 2024 at 20:15, Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
> >>>>
> >>>> In response to my patch removing the "wait for HPD" logic at the
> >>>> beginning of the MSM DP transfer() callback [1], we had some debate
> >>>> about what the "This is an optional function" meant in the
> >>>> documentation of the wait_hpd_asserted() callback. Let's clarify.
> >>>>
> >>>> As talked about in the MSM DP patch [1], before wait_hpd_asserted()
> >>>> was introduced there was no great way for panel drivers to wait for
> >>>> HPD in the case that the "built-in" HPD signal was used. Panel drivers
> >>>> could only wait for HPD if a GPIO was used. At the time, we ended up
> >>>> just saying that if we were using the "built-in" HPD signal that DP
> >>>> AUX controllers needed to wait for HPD themselves at the beginning of
> >>>> their transfer() callback. The fact that the wait for HPD at the
> >>>> beginning of transfer() was awkward/problematic was the whole reason
> >>>> wait_hpd_asserted() was added.
> >>>>
> >>>> Let's make it obvious that if a DP AUX controller implements
> >>>> wait_hpd_asserted() that they don't need a loop waiting for HPD at the
> >>>> start of their transfer() function. We'll still allow DP controllers
> >>>> to work the old way but mark it as deprecated.
> >>>>
> >>>> [1] https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid
> >>>>
> >>>> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> >>>> ---
> >>>> I would consider changing the docs to say that implementing
> >>>> wait_hpd_asserted() is actually _required_ for any DP controllers that
> >>>> want to support eDP panels parented on the DP AUX bus. The issue is
> >>>> that one DP controller (tegra/dpaux.c, found by looking for those that
> >>>> include display/drm_dp_aux_bus.h) does populate the DP AUX bus but
> >>>> doesn't implement wait_hpd_asserted(). I'm actually not sure how/if
> >>>> this work on tegra since I also don't see any delay loop for HPD in
> >>>> tegra's transfer() callback. For now, I've left wait_hpd_asserted() as
> >>>> optional and described the old/deprecated way things used to work
> >>>> before wait_hpd_asserted().
> >>>>
> >>>> include/drm/display/drm_dp_helper.h | 8 +++++++-
> >>>> 1 file changed, 7 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
> >>>> index a62fcd051d4d..b170efa1f5d2 100644
> >>>> --- a/include/drm/display/drm_dp_helper.h
> >>>> +++ b/include/drm/display/drm_dp_helper.h
> >>>> @@ -422,7 +422,13 @@ struct drm_dp_aux {
> >>>> * @wait_hpd_asserted: wait for HPD to be asserted
> >>>> *
> >>>> * This is mainly useful for eDP panels drivers to wait for an eDP
> >>>> - * panel to finish powering on. This is an optional function.
> >>>> + * panel to finish powering on. It is optional for DP AUX controllers
> >>>> + * to implement this function but required for DP AUX endpoints (panel
> >>>> + * drivers) to call it after powering up but before doing AUX transfers.
> >>>> + * If a DP AUX controller does not implement this function then it
> >>>> + * may still support eDP panels that use the AUX controller's built-in
> >>>> + * HPD signal by implementing a long wait for HPD in the transfer()
> >>>> + * callback, though this is deprecated.
> >>>
> >>> It doesn't cover a valid case when the panel driver handles HPD signal
> >>> on its own.
> >>>
> >>
> >> This doc is only for wait_for_hpd_asserted(). If panel driver handles
> >> HPD signal on its own, this will not be called. Do we need a doc for that?
> >
> > This comment declares that this callback must be called by the panel
> > driver: '...but required for DP AUX endpoints [...] to call it after
> > powering up but before doing AUX transfers.'
> >
> > If we were to follow documentation changes from this patch, we'd have
> > to patch panel-edp to always call wait_for_hpd_asserted, even if HPD
> > GPIO is used. However this is not correct from my POV.
> >
>
> hmmm I dont mind explicitly saying "unless the panel can independently
> check the HPD state" but not required in my opinion because if panel was
> capable of checking the HPD gpio (its self-capable) why would it even
> call wait_for_hpd_asserted?
I'm fine with the proposed change. Doug?
>
> I will let you and Doug discuss this but fwiw, I am fine without this
> additional clarification. So the R-b stands with or without this
> additional clause.
>
> >>>> *
> >>>> * This function will efficiently wait for the HPD signal to be
> >>>> * asserted. The `wait_us` parameter that is passed in says that we
> >>>> --
> >>>> 2.44.0.291.gc1ea87d7ee-goog
> >>>>
> >>>
> >>>
> >
> >
> >
--
With best wishes
Dmitry