Re: [PATCH v3 1/4] interconnect: qcom: icc-rpmh: Add QoS configuration support

[Odelu Kukatla]

On 3/6/2024 2:01 PM, Krzysztof Kozlowski wrote:
> On 06/03/2024 08:30, Odelu Kukatla wrote:
>> It adds QoS support for QNOC device and includes support for
>> configuring priority, priority forward disable, urgency forwarding.
>> This helps in priortizing the traffic originating from different
>> interconnect masters at NoC(Network On Chip).
>>
>> Signed-off-by: Odelu Kukatla <quic_okukatla@xxxxxxxxxxx>
>> ---
>>  drivers/interconnect/qcom/icc-rpmh.c | 105 +++++++++++++++++++++++++++
>>  drivers/interconnect/qcom/icc-rpmh.h |  32 ++++++++
>>  2 files changed, 137 insertions(+)
> 
>>  
>> +	if (desc->config) {
>> +		struct resource *res;
>> +		void __iomem *base;
>> +
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +		if (!res) {
>> +			dev_warn(dev, "Skipping QoS, failed to get resource\n");
> 
> Why is this a warning? If the MMIO is not required, your driver should
> not spawn warnings.
> 

Right, it should not be a warning, will clean it up.

> 
>> +			goto skip_qos_config;
>> +		}
>> +
>> +		base = devm_ioremap(dev, res->start, resource_size(res));
> 
> Combine these two (there's a helper for that).
> 

I will address this in v4.

>> +		if (IS_ERR(base)) {
>> +			dev_warn(dev, "Skipping QoS, ioremap failed: %ld\n", PTR_ERR(base));
>> +			goto skip_qos_config;
>> +		};
>> +
>> +		qp->regmap = devm_regmap_init_mmio(dev, base, desc->config);
>> +
> 
> Drop blank line.
> 
>> +		if (IS_ERR(qp->regmap)) {
>> +			dev_warn(dev, "Skipping QoS, regmap failed; %ld\n", PTR_ERR(qp->regmap));
>> +			goto skip_qos_config;
>> +		}
>> +
>> +		qp->num_clks = devm_clk_bulk_get_all(qp->dev, &qp->clks);
>> +		if (qp->num_clks < 0) {
>> +			dev_warn(dev, "Skipping QoS, failed to get clk: %d\n", qp->num_clks);
> 
> dev_info(), because current binding sais clocks are not required and you
> are not allowed to affect ABI. While ABI here does not look broken,
> spawning new warnings to proper users is not welcomed.
> 

I will convert it to dev_info() in next version. But qp->num_clks = 0 if clock property is not added, so it does not spawn warning.
will move all other dev_warn() to dev_info().

> Best regards,
> Krzysztof
> 

Thanks,
Odelu