[PATCH v2 15/21] arm64: dts: qcom: ipq8074: Add PCIe bridge node

From: Manivannan Sadhasivam
Date: Thu Mar 21 2024 - 07:43:15 EST


On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e5b89753aa5c..12324841d1b0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -864,6 +864,16 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
"ahb",
"axi_m_sticky";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};

pcie0: pcie@20000000 {
@@ -929,6 +939,16 @@ IRQ_TYPE_LEVEL_HIGH>, /* int_c */
"axi_m_sticky",
"axi_s_sticky";
status = "disabled";
+
+ pcie@0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ bus-range = <0x01 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
};
};


--
2.25.1