Re: [RFC PATCH v4 2/5] mfd: add driver for Marvell 88PM886 PMIC

[Lee Jones]

On Thu, 21 Mar 2024, Karel Balej wrote:

> Lee Jones, 2024-03-21T15:42:11+00:00:
> > On Mon, 11 Mar 2024, Karel Balej wrote:
> >
> > > From: Karel Balej <balejk@xxxxxxxxx>
> > > 
> > > Marvell 88PM886 is a PMIC which provides various functions such as
> > > onkey, battery, charger and regulators. It is found for instance in the
> > > samsung,coreprimevelte smartphone with which this was tested. Implement
> > > basic support to allow for the use of regulators and onkey.
> > > 
> > > Signed-off-by: Karel Balej <balejk@xxxxxxxxx>
> > > ---
> > > 
> > > Notes:
> > >     RFC v4:
> > >     - Use MFD_CELL_* macros.
> > >     - Address Lee's feedback:
> > >       - Do not define regmap_config.val_bits and .reg_bits.
> > >       - Drop everything regulator related except mfd_cell (regmap
> > >         initialization, IDs enum etc.). Drop pm886_initialize_subregmaps.
> > >       - Do not store regmap pointers as an array as there is now only one
> > >         regmap. Also drop the corresponding enum.
> > >       - Move regmap_config to the header as it is needed in the regulators
> > >         driver.
> > >       - pm886_chip.whoami -> chip_id
> > >       - Reword chip ID mismatch error message and print the ID as
> > >         hexadecimal.
> > >       - Fix includes in include/linux/88pm886.h.
> > >       - Drop the pm886_irq_number enum and define the (for the moment) only
> > >         IRQ explicitly.
> > >     - Have only one MFD cell for all regulators as they are now registered
> > >       all at once in the regulators driver.
> > >     - Reword commit message.
> > >     - Make device table static and remove comma after the sentinel to signal
> > >       that nothing should come after it.
> > >     RFC v3:
> > >     - Drop onkey cell .of_compatible.
> > >     - Rename LDO page offset and regmap to REGULATORS.
> > >     RFC v2:
> > >     - Remove some abstraction.
> > >     - Sort includes alphabetically and add linux/of.h.
> > >     - Depend on OF, remove of_match_ptr and add MODULE_DEVICE_TABLE.
> > >     - Use more temporaries and break long lines.
> > >     - Do not initialize ret in probe.
> > >     - Use the wakeup-source DT property.
> > >     - Rename ret to err.
> > >     - Address Lee's comments:
> > >       - Drop patched in presets for base regmap and related defines.
> > >       - Use full sentences in comments.
> > >       - Remove IRQ comment.
> > >       - Define regmap_config member values.
> > >       - Rename data to sys_off_data.
> > >       - Add _PMIC suffix to Kconfig.
> > >       - Use dev_err_probe.
> > >       - Do not store irq_data.
> > >       - s/WHOAMI/CHIP_ID
> > >       - Drop LINUX part of include guard name.
> > >       - Merge in the regulator series modifications in order to have more
> > >         devices and modify the commit message accordingly. Changes with
> > >         respect to the original regulator series patches:
> > >         - ret -> err
> > >         - Add temporary for dev in pm88x_initialize_subregmaps.
> > >         - Drop of_compatible for the regulators.
> > >         - Do not duplicate LDO regmap for bucks.
> > >     - Rewrite commit message.
> > > 
> > >  drivers/mfd/88pm886.c       | 149 ++++++++++++++++++++++++++++++++++++
> > >  drivers/mfd/Kconfig         |  12 +++
> > >  drivers/mfd/Makefile        |   1 +
> > >  include/linux/mfd/88pm886.h |  38 +++++++++
> > >  4 files changed, 200 insertions(+)
> > >  create mode 100644 drivers/mfd/88pm886.c
> > >  create mode 100644 include/linux/mfd/88pm886.h
> >
> > Looks mostly okay.
> >
> > > diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
> > > new file mode 100644
> > > index 000000000000..a5e6524bb19d
> > > --- /dev/null
> > > +++ b/include/linux/mfd/88pm886.h
> > > @@ -0,0 +1,38 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +#ifndef __MFD_88PM886_H
> > > +#define __MFD_88PM886_H
> > > +
> > > +#include <linux/i2c.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#define PM886_A1_CHIP_ID		0xa1
> > > +
> > > +#define PM886_REGMAP_CONF_MAX_REG	0xfe
> > > +
> > > +#define PM886_REG_ID			0x00
> > > +
> > > +#define PM886_REG_STATUS1		0x01
> > > +#define PM886_ONKEY_STS1		BIT(0)
> > > +
> > > +#define PM886_REG_MISC_CONFIG1		0x14
> > > +#define PM886_SW_PDOWN			BIT(5)
> > > +
> > > +#define PM886_REG_MISC_CONFIG2		0x15
> > > +#define PM886_INT_INV			BIT(0)
> > > +#define PM886_INT_CLEAR			BIT(1)
> > > +#define PM886_INT_RC			0x00
> > > +#define PM886_INT_WC			BIT(1)
> > > +#define PM886_INT_MASK_MODE		BIT(2)
> > > +
> > > +struct pm886_chip {
> > > +	struct i2c_client *client;
> > > +	unsigned int chip_id;
> > > +	struct regmap *regmap;
> > > +};
> > > +
> > > +static const struct regmap_config pm886_i2c_regmap = {
> > > +	.reg_bits = 8,
> > > +	.val_bits = 8,
> > > +	.max_register = PM886_REGMAP_CONF_MAX_REG,
> > > +};
> >
> > Why is this in here?
> 
> Because since I moved the regulators regmap initialization into the
> regulators driver, I need to access it from there.

So move it into the regulators driver?

> > What would you like me to do with this RFC patch?
> 
> I was hoping that you would take this through the MFD tree (after the
> regulator subsystem maintainers approve the regulators driver).
> 
> I have added the remaining regulators to the driver just today and plan
> to send the first non-RFC version of the series after I test it, likely
> over the weekend. Hopefully the regulators patch will finally get some
> attention then.

Don't forget that the merge-window is open.

Many maintainers take a well deserved nap during this period.

-- 
Lee Jones [李琼斯]