[PATCH 2/5] dt-bindings: hwmon: ibmpowernv: convert to dtschema

[Javier Carrasco]

Convert existing binding to support validation.

This is a straightforward conversion with now new properties.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
---
 .../devicetree/bindings/hwmon/ibm,powernv.yaml     | 37 ++++++++++++++++++++++
 .../devicetree/bindings/hwmon/ibmpowernv.txt       | 23 --------------
 2 files changed, 37 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml b/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml
new file mode 100644
index 000000000000..27c949b94c7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,powernv.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,powernv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - ibm,opal-sensor-cooling-fan
+      - ibm,opal-sensor-amb-temp
+      - ibm,opal-sensor-power-supply
+      - ibm,opal-sensor-power
+
+  sensor-id:
+    description:
+      An opaque id provided by the firmware to the kernel, identifies a
+      given sensor and its attribute data.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - sensor-id
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "st,stts751";
+        sensor-id = <0x7052107>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242be60a1..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
-		"ibm,opal-sensor-cooling-fan"
-		"ibm,opal-sensor-amb-temp"
-		"ibm,opal-sensor-power-supply"
-		"ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
-	     given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
-	sensor-id = <0x7052107>;
-	compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
-	sensor-id = <0x5096000>;
-	compatible = "ibm,opal-sensor-amb-temp";
-};

-- 
2.40.1