[PATCH v6 2/4] dt-bindings: fpga: xlnx,fpga-selectmap: add DT schema
From: Charles Perry
Date: Thu Mar 21 2024 - 18:06:33 EST
Document the SelectMAP interface of Xilinx 7 series FPGA.
Signed-off-by: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/fpga/xlnx,fpga-selectmap.yaml | 86 +++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml
new file mode 100644
index 0000000000000..05775746fd706
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SelectMAP FPGA interface
+
+maintainers:
+ - Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
+
+description: |
+ Xilinx 7 Series FPGAs support a method of loading the bitstream over a
+ parallel port named the SelectMAP interface in the documentation. Only
+ the x8 mode is supported where data is loaded at one byte per rising edge of
+ the clock, with the MSB of each byte presented to the D0 pin.
+
+ Datasheets:
+ https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+
+allOf:
+ - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - xlnx,fpga-xc7s-selectmap
+ - xlnx,fpga-xc7a-selectmap
+ - xlnx,fpga-xc7k-selectmap
+ - xlnx,fpga-xc7v-selectmap
+
+ reg:
+ description:
+ At least 1 byte of memory mapped IO
+ maxItems: 1
+
+ prog-gpios:
+ description:
+ config pin (referred to as PROGRAM_B in the manual)
+ maxItems: 1
+
+ done-gpios:
+ description:
+ config status pin (referred to as DONE in the manual)
+ maxItems: 1
+
+ init-gpios:
+ description:
+ initialization status and configuration error pin
+ (referred to as INIT_B in the manual)
+ maxItems: 1
+
+ csi-gpios:
+ description:
+ chip select pin (referred to as CSI_B in the manual)
+ Optional gpio for if the bus controller does not provide a chip select.
+ maxItems: 1
+
+ rdwr-gpios:
+ description:
+ read/write select pin (referred to as RDWR_B in the manual)
+ Optional gpio for if the bus controller does not provide this pin.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - prog-gpios
+ - done-gpios
+ - init-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ fpga-mgr@8000000 {
+ compatible = "xlnx,fpga-xc7s-selectmap";
+ reg = <0x8000000 0x4>;
+ prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+ init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+ done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+ };
+...
--
2.43.0