Re: [PATCH v4 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI

[Kate Hsuan]

Hi

Thank you for reviewing.

On Tue, Mar 12, 2024 at 7:04 AM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
>
> Wed, Mar 06, 2024 at 10:58:01AM +0800, Kate Hsuan kirjoitti:
> > This LED controller also installed on a Xiaomi pad2 and it is a x86
> > platform. The original driver is based on device tree and can't be
> > used for this ACPI based system. This patch migrated the driver to
> > use fwnode to access the properties. Moreover, the fwnode API
> > supports device tree so this work won't effect the original
> > implementations.
>
> ...
>
> > +     fwnode_for_each_available_child_node(np, child) {
>
> Please, rename np to fwnode to avoid confusion.
>
> > +             num_channels++;
> > +     }
>
> ...
>
> > -     for_each_available_child_of_node(np, child) {
> > +     fwnode_for_each_available_child_node(np, child) {
> >               u32 mono_color;
> >               u32 reg;
> >               int ret;
> >
> > -             ret = of_property_read_u32(child, "reg", &reg);
> > +             ret = fwnode_property_read_u32(child, "reg", &reg);
> >               if (ret != 0 || reg >= chip->num_leds) {
> >                       dev_err(chip->dev, "invalid 'reg' of %pOFn\n", child);
>
> Must be %pfw now.
>
> > -                     of_node_put(child);
> > +                     fwnode_handle_put(child);
>
> >                       return -EINVAL;
>
> Side note: This shouldn't shadow error code when ret != 0.
>
> >               }
>
> ...
>
> > -             ret = of_property_read_u32(child, "color", &mono_color);
> > +             ret = fwnode_property_read_u32(child, "color", &mono_color);
> >               if (ret < 0 && ret != -EINVAL) {
> >                       dev_err(chip->dev, "failed to parse 'color' of %pOF\n", child);
>
> Must be %pfw now.
>
> > -                     of_node_put(child);
> > +                     fwnode_handle_put(child);
> >                       return ret;
> >               }
>
> ...
>
> > -     ret = of_property_read_u32(np, "reg", &reg);
> > +     ret = fwnode_property_read_u32(np, "reg", &reg);
> >       if (ret != 0 || reg >= chip->num_leds) {
> >               dev_err(chip->dev, "invalid 'reg' of %pOFn\n", np);
>
> Must be %pfw now.
>
> >               return -EINVAL;
>
> >       /* Color property is optional in single color case */
> > -     ret = of_property_read_u32(np, "color", &color);
> > +     ret = fwnode_property_read_u32(np, "color", &color);
> >       if (ret < 0 && ret != -EINVAL) {
> >               dev_err(chip->dev, "failed to parse 'color' of %pOF\n", np);
>
> Must be %pfw now.
>
> >               return ret;
> >       }
>
> ...
>
> > +     struct fwnode_handle *child, *np;
>
> Do not use np for sturct fwnode_handle. It will be quite confusing.
>
> ...
>
> > -     chip->num_leds = (int)(unsigned long)of_device_get_match_data(chip->dev);
> > +     count = device_get_child_node_count(dev);
>
> >
>
> Redundant blank line.
>
> > -     count = of_get_available_child_count(np);
> >       if (!count || count > chip->num_leds)
> >               return -EINVAL;
>
> ...
>
> > +     chip->num_leds = (unsigned long)i2c_get_match_data(client);
>
> No warnings during compilation?
Yes, the compiler doesn't complain about it.

>
> ...
>
> > +static const struct i2c_device_id ktd202x_id[] = {
> > +     {"ktd2026", KTD2026_NUM_LEDS},
> > +     {"ktd2027", KTD2027_NUM_LEDS},
> > +     {},
>
> N ocomma for the terminator entry.
>
> > +};
> > +MODULE_DEVICE_TABLE(i2c, ktd202x_id);
>
> ...
>
> > +#ifndef CONFIG_ACPI
>
> Please, no. Drop them.
Okay, I've dropped them in v5 patch.

>
> >  static const struct of_device_id ktd202x_match_table[] = {
> >       { .compatible = "kinetic,ktd2026", .data = (void *)KTD2026_NUM_LEDS },
> >       { .compatible = "kinetic,ktd2027", .data = (void *)KTD2027_NUM_LEDS },
> >       {},
> >  };
> >  MODULE_DEVICE_TABLE(of, ktd202x_match_table);
> > +#endif
> >
> >  static struct i2c_driver ktd202x_driver = {
> >       .driver = {
> >               .name = "leds-ktd202x",
> > +#ifndef CONFIG_ACPI
> >               .of_match_table = ktd202x_match_table,
> > +#endif
>
> This is quite unusual besides being ugly.
>
> >       },
> >       .probe = ktd202x_probe,
> >       .remove = ktd202x_remove,
> >       .shutdown = ktd202x_shutdown,
> > +     .id_table = ktd202x_id,
> >  };
>
> --
> With Best Regards,
> Andy Shevchenko
>
>


-- 
BR,
Kate