Re: [PATCH 3/5] arm64: dts: qcom: pm7250b: Add node for PMIC VBUS booster

[Konrad Dybcio]

On 22.03.2024 09:01, Luca Weiss wrote:
> Add the required DTS node for the USB VBUS output regulator, which is
> available on PM7250B. This will provide the VBUS source to connected
> peripherals.
> 
> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 3bf7cf5d1700..91a046b3529c 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -45,6 +45,12 @@ pmic@PM7250B_SID {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pm7250b_vbus: usb-vbus-regulator@1100 {
> +			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
> +			status = "disabled";
> +			reg = <0x1100>;

Could you fix the ordering here?

Konrad