Re: [PATCH v2 2/3] PCI: qcom: Add equalization settings for gen4

[Konrad Dybcio]

On 20.03.2024 08:14, Shashank Babu Chinta Venkata wrote:
> GEN3_RELATED_OFFSET is being used as shadow register for generation4 and
> generation5 data rates based on rate select mask settings on this register.
> Select relevant mask and equalization settings for generation4 operation.
> 
> Signed-off-by: Shashank Babu Chinta Venkata <quic_schintav@xxxxxxxxxxx>
> ---

[...]

> +
> +#define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF          0x8ac
> +#define GEN3_EQ_FMDC_T_MIN_PHASE23_MASK         GENMASK(4, 0)
> +#define GEN3_EQ_FMDC_N_EVALS_MASK               GENMASK(9, 5)
> +#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA_MASK  GENMASK(13, 10)
> +#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA_MASK	GENMASK(17, 14)
> +#define GEN3_EQ_FMDC_N_EVALS_SHIFT			5
> +#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA_SHIFT		10
> +#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA_SHIFT	14

The beauty of bitops.h is you no longer need to define these shifts..
Just use FIELD_GET/FIELD_PREP with the field! Please also drop _MASK
from the leftover definitions.

> +void qcom_pcie_cmn_set_16gt_eq_settings(struct dw_pcie *pci)
> +{
> +	u32 reg;
> +
> +	/*
> +	 * GEN3_RELATED_OFF is repurposed to be used with GEN4(16GT/s) rate
> +	 * as well based on RATE_SHADOW_SEL_MASK settings on this register.
> +	 */

Given this comment and the commit message, should setting of this field
be factored out to a function that would accept a generation argument?

> +	reg = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> +	reg &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
> +	reg &= ~GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK;
> +	reg |= (0x1 << GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT);
> +	dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, reg);
> +
> +	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF);
> +	reg &= ~GEN3_EQ_FMDC_T_MIN_PHASE23_MASK;
> +	reg &= ~GEN3_EQ_FMDC_N_EVALS_MASK;
> +	reg |= (GEN3_EQ_FMDC_N_EVALS_16GT_VAL <<
> +		GEN3_EQ_FMDC_N_EVALS_SHIFT);
> +	reg &= ~GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA_MASK;
> +	reg |= (GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA_16GT_VAL <<
> +		GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA_SHIFT);
> +	reg &= ~GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA_MASK;
> +	reg |= (GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA_16GT_VAL <<
> +		GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA_SHIFT);
> +	dw_pcie_writel_dbi(pci, GEN3_EQ_FB_MODE_DIR_CHANGE_OFF, reg);
> +
> +	reg = dw_pcie_readl_dbi(pci, GEN3_EQ_CONTROL_OFF);
> +	reg &= ~GEN3_EQ_CONTROL_OFF_FB_MODE_MASK;
> +	reg &= ~GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE;
> +	reg &= ~GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL;
> +	reg &= ~GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK;
> +	dw_pcie_writel_dbi(pci, GEN3_EQ_CONTROL_OFF, reg);
> +}