[PATCH 6.8 207/715] arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number

[Sasha Levin]

From: Romain Naour <romain.naour@xxxxxxxx>

[ Upstream commit 7f25d6926d178734db17cfc12f0b1841e82914da ]

The tps659413 and tps659411 nodes set WKUP_GPIO0_7 (G28) pin as input
to be used as PMIC interrupt but uses 9 (WKUP_GPIO0_9) as
"interrupts" property.

Replace 9 by 7 for both tps659413 and tps659411 after checking in the
board schematic [1].

[1] https://www.ti.com/tool/SK-TDA4VM

Fixes: b808cef0be46 ("arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs")
Cc: Neha Malcom Francis <n-francis@xxxxxx>
Signed-off-by: Romain Naour <romain.naour@xxxxxxxx>
Reviewed-by: Neha Malcom Francis <n-francis@xxxxxx>
Link: https://lore.kernel.org/r/20240209171146.307465-2-romain.naour@xxxxxxxx
Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 188dfe291a32b..658764f7d5443 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -574,7 +574,7 @@ tps659413: pmic@48 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_irq_pins_default>;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		ti,primary-pmic;
@@ -651,7 +651,7 @@ tps659411: pmic@4c {
 		reg = <0x4c>;
 		system-power-controller;
 		interrupt-parent = <&wkup_gpio0>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		buck1234-supply = <&vsys_3v3>;
-- 
2.43.0