[PATCH 5.15 251/317] clk: zynq: Prevent null pointer dereference caused by kmalloc failure

[Sasha Levin]

From: Duoming Zhou <duoming@xxxxxxxxxx>

[ Upstream commit 7938e9ce39d6779d2f85d822cc930f73420e54a6 ]

The kmalloc() in zynq_clk_setup() will return null if the
physical memory has run out. As a result, if we use snprintf()
to write data to the null address, the null pointer dereference
bug will happen.

This patch uses a stack variable to replace the kmalloc().

Fixes: 0ee52b157b8e ("clk: zynq: Add clock controller driver")
Suggested-by: Michal Simek <michal.simek@xxxxxxx>
Suggested-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Duoming Zhou <duoming@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240301084437.16084-1-duoming@xxxxxxxxxx
Acked-by: Michal Simek <michal.simek@xxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/clk/zynq/clkc.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 204b83d911b90..c615664505a55 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -42,6 +42,7 @@ static void __iomem *zynq_clkc_base;
 #define SLCR_SWDT_CLK_SEL		(zynq_clkc_base + 0x204)
 
 #define NUM_MIO_PINS	54
+#define CLK_NAME_LEN	16
 
 #define DBG_CLK_CTRL_CLKACT_TRC		BIT(0)
 #define DBG_CLK_CTRL_CPU_1XCLKACT	BIT(1)
@@ -215,7 +216,7 @@ static void __init zynq_clk_setup(struct device_node *np)
 	int i;
 	u32 tmp;
 	int ret;
-	char *clk_name;
+	char clk_name[CLK_NAME_LEN];
 	unsigned int fclk_enable = 0;
 	const char *clk_output_name[clk_max];
 	const char *cpu_parents[4];
@@ -425,12 +426,10 @@ static void __init zynq_clk_setup(struct device_node *np)
 			"gem1_emio_mux", CLK_SET_RATE_PARENT,
 			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock);
 
-	tmp = strlen("mio_clk_00x");
-	clk_name = kmalloc(tmp, GFP_KERNEL);
 	for (i = 0; i < NUM_MIO_PINS; i++) {
 		int idx;
 
-		snprintf(clk_name, tmp, "mio_clk_%2.2d", i);
+		snprintf(clk_name, CLK_NAME_LEN, "mio_clk_%2.2d", i);
 		idx = of_property_match_string(np, "clock-names", clk_name);
 		if (idx >= 0)
 			can_mio_mux_parents[i] = of_clk_get_parent_name(np,
@@ -438,7 +437,6 @@ static void __init zynq_clk_setup(struct device_node *np)
 		else
 			can_mio_mux_parents[i] = dummy_nm;
 	}
-	kfree(clk_name);
 	clk_register_mux(NULL, "can_mux", periph_parents, 4,
 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_CLK_CTRL, 4, 2, 0,
 			&canclk_lock);
-- 
2.43.0