[PATCH 6.1 158/451] arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

[ Upstream commit af6f6778d34cb40e60368e288767f674cc0c5f60 ]

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Stable-dep-of: 7c38989d0f7a ("arm64: dts: qcom: sm8150: correct PCIe wake-gpios")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index eb1a9369926d2..b829a9ebc5670 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1822,7 +1822,7 @@ pcie0: pci@1c00000 {
 			phys = <&pcie0_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
@@ -1925,7 +1925,7 @@ pcie1: pci@1c08000 {
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
 			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
-- 
2.43.0