[PATCH 00/11] md: avoid counter operation conflicts

[tada keisuke]

Currently, active_aligned_reads and nr_pending used as counters are atomic types.
Therefore, when inc/dec in a multi-core results in conflicts.

To solve this problem, use "percpu_ref" counters that can avoid conflicts and maintain consistency.

Switch modes of percpu_ref to achieve both consistency and conflict avoidance.
During normal operations such as inc/dec, it operates as percpu mode.
When consistency is required, it operates as atomic mode.
The operations that require consistency are as follows:
・Zero check for the counter
・All operations in RAID 1/10

Patches 1, 3, 6 change active_aligned_reads, and patches 2, 4, 5, 7 to 11 change nr_pending.
nr_pending temporarily switch from percpu mode to atomic mode in patch 7.
This is to reduce the amount of changes from patches 8 to 10.
Finally, nr_pending switch from atomic mode to percpu mode in patch 11.

Keisuke TADA (11):
  add infra for active_aligned_reads changes
  add infra for nr_pending changes
  workaround for inconsistency of config state in takeover
  minimize execution of zero check for nr_pending
  match the type of variables to percpu_ref
  avoid conflicts in active_aligned_reads operations
  change the type of nr_pending from atomic_t to percpu_ref
  add atomic mode switching in RAID 1/10
  add atomic mode switching when removing disk
  add atomic mode switching when I/O completion
  avoid conflicts in nr_pending operations

 drivers/md/md-bitmap.c   |  2 +-
 drivers/md/md.c          | 40 +++++++++++++++---
 drivers/md/md.h          | 62 ++++++++++++++++++++++++----
 drivers/md/raid1.c       | 37 +++++++++++------
 drivers/md/raid10.c      | 60 ++++++++++++++++-----------
 drivers/md/raid5-cache.c |  4 +-
 drivers/md/raid5.c       | 89 +++++++++++++++++++++++++++-------------
 drivers/md/raid5.h       | 17 +++++++-
 8 files changed, 230 insertions(+), 81 deletions(-)


base-commit: fcf3f7e2fc8a53a6140beee46ec782a4c88e4744
-- 
2.34.1