Re: [PATCH v4 1/2] dt-bindings: net: add phy-supply property for stm32

[Andrew Lunn]

On Tue, Mar 26, 2024 at 01:58:48PM +0100, Christophe Roullier wrote:
> Phandle to a regulator that provides power to the PHY. This
> regulator will be managed during the PHY power on/off sequence.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7dc..80937b28fa046 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -82,6 +82,9 @@ properties:
>        Should be phandle/offset pair. The phandle to the syscon node which
>        encompases the glue register, and the offset of the control register
>  
> +  phy-supply:
> +    description: PHY regulator

~/linux/drivers/net/ethernet/stmicro/stmmac$ grep regulator_get *
dwmac-rk.c:	bsp_priv->regulator = devm_regulator_get(dev, "phy");
dwmac-sun8i.c:	gmac->regulator = devm_regulator_get_optional(dev, "phy");
dwmac-sunxi.c:	gmac->regulator = devm_regulator_get_optional(dev, "phy");

Maybe i'm missing something, but i don't see an actual implementation
of this binding?

	Andrew