[PATCH 22/23] drivers: media: i2c: imx258: Add support for powerdown gpio

[git]

From: Luigi311 <git@xxxxxxxxxxxx>

On some boards powerdown signal needs to be deasserted for this
sensor to be enabled.

Signed-off-by: Ondrej Jirman <megi@xxxxxx>
---
 .../devicetree/bindings/media/i2c/sony,imx258.yaml  |  4 ++++
 drivers/media/i2c/imx258.c                          | 13 +++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
index c7856de15ba3..0414085bf22f 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
@@ -35,6 +35,10 @@ properties:
   reg:
     maxItems: 1
 
+  powerdown-gpios:
+    description: |-
+      Reference to the GPIO connected to the PWDN pin, if any.
+
   reset-gpios:
     description: |-
       Reference to the GPIO connected to the XCLR pin, if any.
diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index c559a06bf180..d8c51d5f04e0 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -686,6 +686,8 @@ struct imx258 {
 	unsigned int lane_mode_idx;
 	unsigned int csi2_flags;
 
+	struct gpio_desc *powerdown_gpio;
+
 	/*
 	 * Mutex for serialized access:
 	 * Protect sensor module set pad format and start/stop streaming safely.
@@ -1220,6 +1222,8 @@ static int imx258_power_on(struct device *dev)
 	struct imx258 *imx258 = to_imx258(sd);
 	int ret;
 
+	gpiod_set_value_cansleep(imx258->powerdown_gpio, 0);
+
 	ret = regulator_bulk_enable(IMX258_NUM_SUPPLIES,
 				    imx258->supplies);
 	if (ret) {
@@ -1231,6 +1235,7 @@ static int imx258_power_on(struct device *dev)
 	ret = clk_prepare_enable(imx258->clk);
 	if (ret) {
 		dev_err(dev, "failed to enable clock\n");
+		gpiod_set_value_cansleep(imx258->powerdown_gpio, 1);
 		regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
 	}
 
@@ -1245,6 +1250,8 @@ static int imx258_power_off(struct device *dev)
 	clk_disable_unprepare(imx258->clk);
 	regulator_bulk_disable(IMX258_NUM_SUPPLIES, imx258->supplies);
 
+	gpiod_set_value_cansleep(imx258->powerdown_gpio, 1);
+
 	return 0;
 }
 
@@ -1548,6 +1555,12 @@ static int imx258_probe(struct i2c_client *client)
 	if (!imx258->variant_cfg)
 		imx258->variant_cfg = &imx258_cfg;
 
+	/* request optional power down pin */
+	imx258->powerdown_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(imx258->powerdown_gpio))
+		return PTR_ERR(imx258->powerdown_gpio);
+
 	/* Initialize subdev */
 	v4l2_i2c_subdev_init(&imx258->sd, client, &imx258_subdev_ops);
 
-- 
2.42.0