Re: [PATCH 1/2] arm64: dts: rockchip: Add enable-strobe-pulldown to emmc phy on ROCK Pi 4
From: Chen-Yu Tsai
Date: Thu Mar 28 2024 - 01:39:23 EST
On Thu, Mar 28, 2024 at 4:33 AM Folker Schwesinger
<dev@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Commit 8b5c2b45b8f0 disabled the internal pull-down for the strobe line
> causing I/O errors in HS400 mode for various eMMC modules.
>
> Enable the internal strobe pull-down for ROCK Pi 4 boards. Also re-enable
> HS400 mode, that was replaced with HS200 mode as a workaround for the
> stability issues in:
> cee572756aa2 ("arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4").
>
> This was tested on ROCK 4SE and ROCK Pi 4B+.
>
> Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts")
> Signed-off-by: Folker Schwesinger <dev@xxxxxxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> index 281a12180703..b9d6284bb804 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
> @@ -194,6 +194,7 @@ &cpu_b1 {
> };
>
> &emmc_phy {
> + rockchip,enable-strobe-pulldown;
> status = "okay";
> };
>
> @@ -648,7 +649,8 @@ &saradc {
> &sdhci {
> max-frequency = <150000000>;
> bus-width = <8>;
> - mmc-hs200-1_8v;
Shouldn't this be kept around? The node should list all supported modes,
not just the highest one. Same for the other patch.
ChenYu
> + mmc-hs400-1_8v;
> + mmc-hs400-enhanced-strobe;
> non-removable;
> status = "okay";
> };
> --
> 2.44.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel