Re: [RFC PATCH v2 3/5] dt-bindings: clock: meson: document A1 SoC audio clock controller driver

[Krzysztof Kozlowski]

On 28/03/2024 02:08, Jan Dakinevich wrote:
> Add device tree bindings for A1 SoC audio clock and reset controllers.
> 
> Signed-off-by: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
> ---

> +title: Amlogic A1 Audio Clock Control Unit and Reset Controller
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> +  - Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> +  - Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,a1-audio-clkc
> +      - amlogic,a1-audio2-clkc

What is "2"?

> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 6
> +    maxItems: 7
> +
> +  clock-names:
> +    minItems: 6
> +    maxItems: 7
> +
> +required:
> +  - compatible
> +  - '#clock-cells'
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - amlogic,a1-audio-clkc
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: input core clock
> +            - description: input main peripheral bus clock
> +            - description: input dds_in
> +            - description: input fixed pll div2
> +            - description: input fixed pll div3
> +            - description: input hifi_pll
> +            - description: input oscillator (usually at 24MHz)
> +        clocks-names:
> +          items:
> +            - const: core
> +            - const: pclk
> +            - const: dds_in
> +            - const: fclk_div2
> +            - const: fclk_div3
> +            - const: hifi_pll
> +            - const: xtal
> +      required:
> +        - '#reset-cells'
> +    else:
> +      properties:
> +        clocks:
> +          items:
> +            - description: input main peripheral bus clock
> +            - description: input dds_in
> +            - description: input fixed pll div2
> +            - description: input fixed pll div3
> +            - description: input hifi_pll
> +            - description: input oscillator (usually at 24MHz)
> +        clock-names:
> +          items:
> +            - const: pclk
> +            - const: dds_in
> +            - const: fclk_div2
> +            - const: fclk_div3
> +            - const: hifi_pll
> +            - const: xtal

#reset-cells: false

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
> +    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
> +    #include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
> +    audio {

If there is going to be any new version/resend:
soc {

> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        clkc_audio: audio-clock-controller@fe050000 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
So: clock-controller

> +                compatible = "amlogic,a1-audio-clkc";
> +                reg = <0x0 0xfe050000 0x0 0xb0>;
> +                #clock-cells = <1>;
> +                #reset-cells = <1>;
> +                clocks = <&clkc_audio2 AUD2_CLKID_AUDIOTOP>,
> +                         <&clkc_periphs CLKID_AUDIO>,
> +                         <&clkc_periphs CLKID_DDS_IN>,
> +                         <&clkc_pll CLKID_FCLK_DIV2>,
> +                         <&clkc_pll CLKID_FCLK_DIV3>,
> +                         <&clkc_pll CLKID_HIFI_PLL>,
> +                         <&xtal>;
> +                clock-names = "core",
> +                              "pclk",
> +                              "dds_in",
> +                              "fclk_div2",
> +                              "fclk_div3",
> +                              "hifi_pll",
> +                              "xtal";
> +        };
> +
> +        clkc_audio2: audio-clock-controller@fe054800 {

clock-controller
(so I expect resend)

> +                compatible = "amlogic,a1-audio2-clkc";
> +                reg = <0x0 0xfe054800 0x0 0x20>;
> +                #clock-cells = <1>;
> +                clocks = <&clkc_periphs CLKID_AUDIO>,
> +                         <&clkc_periphs CLKID_DDS_IN>,
> +                         <&clkc_pll CLKID_FCLK_DIV2>,
> +                         <&clkc_pll CLKID_FCLK_DIV3>,
> +                         <&clkc_pll CLKID_HIFI_PLL>,
> +                         <&xtal>;
> +                clock-names = "pclk",
> +                              "dds_in",
> +                              "fclk_div2",
> +                              "fclk_div3",
> +                              "hifi_pll",
> +                              "xtal";
> +        };
> +    };
> diff --git a/include/dt-bindings/clock/amlogic,a1-audio-clkc.h b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
> new file mode 100644
> index 000000000000..b30df3b1ae08
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
> @@ -0,0 +1,122 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> + *
> + * Author: Jan Dakinevich <jan.dakinevich@xxxxxxxxxxxxxxxxx>
> + */
> +
> +#ifndef __A1_AUDIO_CLKC_BINDINGS_H
> +#define __A1_AUDIO_CLKC_BINDINGS_H
> +
> +#define AUD_CLKID_DDR_ARB		1
> +#define AUD_CLKID_TDMIN_A		2
> +#define AUD_CLKID_TDMIN_B		3
> +#define AUD_CLKID_TDMIN_LB		4

Why both clock controllers have the same clocks? This is confusing. It
seems you split same block into two!

Best regards,
Krzysztof