Re: [PATCH v1] ARM: dts: stm32: Update button on stm32mp135f-dk

[Patrice CHOTARD]

This patch must be dropped, i made a mistake.

Sorry
Patrice

On 3/28/24 09:01, patrice.chotard@xxxxxxxxxxx wrote:
> From: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> 
> On schematics, 2 buttons are available on stm32mp135-dk board:
>   _ button "user1" connected to GPIOA14
>   _ button "user2" connected to GPIOA13
> 
> Reflect that on device tree.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/st/stm32mp135f-dk.dts | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> index 52171214a308..f7e03bc7eccb 100644
> --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> @@ -48,9 +48,15 @@ optee@dd000000 {
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  
> -		button-user {
> -			label = "User-PA13";
> +		button-user-1 {
> +			label = "User-1";
>  			linux,code = <BTN_1>;
> +			gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
> +
> +		button-user-2 {
> +			label = "User-2";
> +			linux,code = <BTN_2>;
>  			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>  		};
>  	};