Re: [PATCH RFC 1/7] regulator: devres: add APIs for reference supplies

[Jonathan Cameron]

On Wed, 27 Mar 2024 18:18:50 -0500
David Lechner <dlechner@xxxxxxxxxxxx> wrote:

> A common use case for regulators is to supply a reference voltage to an
> analog input or output device. This adds two new devres APIs to get,
> enable, and get the voltage in a single call. This allows eliminating
> boilerplate code in drivers that use reference supplies in this way.
> 
> devm_regulator_get_enable_get_voltage() is intended for cases where the
Maybe avoid the double get?
devm_regulator_get_enable_read_voltage() perhaps?

> supply is required to provide an external reference voltage.
> 
> devm_regulator_get_optional_enable_get_voltage() is intended for cases
> where the supply is optional and device typically uses an internal
> reference voltage if the supply is not available.
> 
> Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>

In general I'll find this very useful (there are 50+ incidence
of the pattern this can replace in IIO).
I would keep it more similar to other devm regulator related functions
and not do error printing internally though.

Jonathan

> ---
>  Documentation/driver-api/driver-model/devres.rst |  2 +
>  drivers/regulator/devres.c                       | 83 ++++++++++++++++++++++++
>  include/linux/regulator/consumer.h               | 14 ++++
>  3 files changed, 99 insertions(+)
> 
> diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst
> index 7be8b8dd5f00..fd954d09e13c 100644
> --- a/Documentation/driver-api/driver-model/devres.rst
> +++ b/Documentation/driver-api/driver-model/devres.rst
> @@ -433,9 +433,11 @@ REGULATOR
>    devm_regulator_bulk_put()
>    devm_regulator_get()
>    devm_regulator_get_enable()
> +  devm_regulator_get_enable_get_voltage()
>    devm_regulator_get_enable_optional()
>    devm_regulator_get_exclusive()
>    devm_regulator_get_optional()
> +  devm_regulator_get_optional_enable_get_voltage()
>    devm_regulator_irq_helper()
>    devm_regulator_put()
>    devm_regulator_register()
> diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
> index 90bb0d178885..e240926defc5 100644
> --- a/drivers/regulator/devres.c
> +++ b/drivers/regulator/devres.c
> @@ -145,6 +145,89 @@ struct regulator *devm_regulator_get_optional(struct device *dev,
>  }
>  EXPORT_SYMBOL_GPL(devm_regulator_get_optional);
>  
> +static int _devm_regulator_get_enable_get_voltage(struct device *dev,
> +						  const char *id,
> +						  bool silent_enodev)
> +{
> +	struct regulator *r;
> +	int ret;
> +
> +	/*
> +	 * Since we need a real voltage, we use devm_regulator_get_optional()
> +	 * here to avoid getting a dummy regulator if the supply is not present.
> +	 */
> +	r = devm_regulator_get_optional(dev, id);
> +	if (silent_enodev && PTR_ERR(r) == -ENODEV)
> +		return -ENODEV;
> +	if (IS_ERR(r))
> +		return dev_err_probe(dev, PTR_ERR(r),

There isn't any obvious precedence that I can see for using dev_err_probe() in these
calls.  I'd not introduce it here.

It's probably enough to print an error message at the caller that
just says we failed to get the voltage (rather than which step failed)./

> +				     "failed to get regulator '%s'\n", id);
> +
> +	ret = regulator_enable(r);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "failed to enable regulator '%s'\n", id);
> +
> +	ret = devm_add_action_or_reset(dev, regulator_action_disable, r);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "failed to add disable action for regulator '%s'\n",
> +				     id);
> +
> +	ret = regulator_get_voltage(r);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret,
> +				     "failed to get voltage for regulator '%s'\n",
> +				     id);
> +
> +	return ret;
> +}
> +
> +/**
> + * devm_regulator_get_enable_get_voltage - Resource managed regulator get and
> + *                                         enable that returns the voltage
> + * @dev: device to supply
> + * @id:  supply name or regulator ID.
> + *
> + * Get and enable regulator for duration of the device life-time.
> + * regulator_disable() and regulator_put() are automatically called on driver
> + * detach. See regulator_get_optional(), regulator_enable(), and
> + * regulator_get_voltage() for more information.
> + *
> + * This is a convenience function for supplies that provide a reference voltage
> + * where the consumer driver just needs to know the voltage and keep the
> + * regulator enabled. Also, as a convenience, this prints error messages on
> + * failure.
> + *
> + * Returns: voltage in microvolts on success, or an error code on failure.
> + */
> +int devm_regulator_get_enable_get_voltage(struct device *dev, const char *id)
> +{
> +	return _devm_regulator_get_enable_get_voltage(dev, id, false);
> +}
> +EXPORT_SYMBOL_GPL(devm_regulator_get_enable_get_voltage);
> +
> +/**
> + * devm_regulator_get_optional_enable_get_voltage - Resource managed regulator
> + *                                                  get and enable that returns
> + *                                                  the voltage
> + * @dev: device to supply
> + * @id:  supply name or regulator ID.
> + *
> + * This function is identical to devm_regulator_get_enable_get_voltage() except
> + * that it does not print an error message in the case of -ENODEV. Callers are
> + * expected to handle -ENODEV as a special case instead of passing it on as an
> + * error.
> + *
> + * Returns: voltage in microvolts on success, or an error code on failure.
> + */
> +int devm_regulator_get_optional_enable_get_voltage(struct device *dev,
> +						   const char *id)
> +{
> +	return _devm_regulator_get_enable_get_voltage(dev, id, true);
> +}
> +EXPORT_SYMBOL_GPL(devm_regulator_get_optional_enable_get_voltage);
> +
>  static int devm_regulator_match(struct device *dev, void *res, void *data)
>  {
>  	struct regulator **r = res;
> diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
> index 4660582a3302..35596db521a0 100644
> --- a/include/linux/regulator/consumer.h
> +++ b/include/linux/regulator/consumer.h
> @@ -164,6 +164,8 @@ struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
>  							   const char *id);
>  int devm_regulator_get_enable(struct device *dev, const char *id);
>  int devm_regulator_get_enable_optional(struct device *dev, const char *id);
> +int devm_regulator_get_enable_get_voltage(struct device *dev, const char *id);
> +int devm_regulator_get_optional_enable_get_voltage(struct device *dev, const char *id);
>  void regulator_put(struct regulator *regulator);
>  void devm_regulator_put(struct regulator *regulator);
>  
> @@ -329,6 +331,18 @@ static inline int devm_regulator_get_enable_optional(struct device *dev,
>  	return -ENODEV;
>  }
>  
> +static inline int devm_regulator_get_enable_get_voltage(struct device *dev,
> +							const char *id)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int devm_regulator_get_optional_enable_get_voltage(struct device *dev,
> +								 const char *id)
> +{
> +	return -ENODEV;
> +}
> +
>  static inline struct regulator *__must_check
>  regulator_get_optional(struct device *dev, const char *id)
>  {
>