[PATCH v2 2/2] thermal: amlogic: support A1 SoC family Thermal Sensor controller

[Dmitry Rokosov]

In comparison to other Amlogic chips, there is one key difference.
The offset for the sec_ao base, also known as u_efuse_off, is special,
while other aspects remain the same.

Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 drivers/thermal/amlogic_thermal.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/thermal/amlogic_thermal.c b/drivers/thermal/amlogic_thermal.c
index 5877cde25b79..1d23afd32013 100644
--- a/drivers/thermal/amlogic_thermal.c
+++ b/drivers/thermal/amlogic_thermal.c
@@ -222,6 +222,12 @@ static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
 	.regmap_config = &amlogic_thermal_regmap_config_g12a,
 };
 
+static const struct amlogic_thermal_data amlogic_thermal_a1_cpu_param = {
+	.u_efuse_off = 0x114,
+	.calibration_parameters = &amlogic_thermal_g12a,
+	.regmap_config = &amlogic_thermal_regmap_config_g12a,
+};
+
 static const struct of_device_id of_amlogic_thermal_match[] = {
 	{
 		.compatible = "amlogic,g12a-ddr-thermal",
@@ -231,6 +237,10 @@ static const struct of_device_id of_amlogic_thermal_match[] = {
 		.compatible = "amlogic,g12a-cpu-thermal",
 		.data = &amlogic_thermal_g12a_cpu_param,
 	},
+	{
+		.compatible = "amlogic,a1-cpu-thermal",
+		.data = &amlogic_thermal_a1_cpu_param,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
-- 
2.43.0