[PATCH v2 05/11] pinctrl: aw9523: Use temporary variable for HW IRQ number

[Andy Shevchenko]

There are two different ways on how to get HW IRQ number in some functions.
Unify that by using temporary variable and irqd_to_hwirq() call.

Signed-off-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
 drivers/pinctrl/pinctrl-aw9523.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-aw9523.c b/drivers/pinctrl/pinctrl-aw9523.c
index 7db901216a94c..0f3361fa9ed88 100644
--- a/drivers/pinctrl/pinctrl-aw9523.c
+++ b/drivers/pinctrl/pinctrl-aw9523.c
@@ -428,12 +428,12 @@ static int aw9523_gpio_irq_type(struct irq_data *d, unsigned int type)
 static void aw9523_irq_mask(struct irq_data *d)
 {
 	struct aw9523 *awi = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned int n = d->hwirq % AW9523_PINS_PER_PORT;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	unsigned int n = hwirq % AW9523_PINS_PER_PORT;
 
-	regmap_update_bits(awi->regmap,
-			   AW9523_REG_INTR_DIS(d->hwirq),
+	regmap_update_bits(awi->regmap, AW9523_REG_INTR_DIS(hwirq),
 			   BIT(n), BIT(n));
-	gpiochip_disable_irq(&awi->gpio, irqd_to_hwirq(d));
+	gpiochip_disable_irq(&awi->gpio, hwirq);
 }
 
 /*
@@ -446,11 +446,11 @@ static void aw9523_irq_mask(struct irq_data *d)
 static void aw9523_irq_unmask(struct irq_data *d)
 {
 	struct aw9523 *awi = gpiochip_get_data(irq_data_get_irq_chip_data(d));
-	unsigned int n = d->hwirq % AW9523_PINS_PER_PORT;
+	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	unsigned int n = hwirq % AW9523_PINS_PER_PORT;
 
-	gpiochip_enable_irq(&awi->gpio, irqd_to_hwirq(d));
-	regmap_update_bits(awi->regmap,
-			   AW9523_REG_INTR_DIS(d->hwirq),
+	gpiochip_enable_irq(&awi->gpio, hwirq);
+	regmap_update_bits(awi->regmap, AW9523_REG_INTR_DIS(hwirq),
 			   BIT(n), 0);
 }
 
-- 
2.44.0