Re: [PATCH stable 5.10 5.15 v2] serial: sc16is7xx: convert from _raw_ to _noinc_ regmap functions for FIFO
From: Greg Kroah-Hartman
Date: Sat Mar 30 2024 - 05:09:42 EST
On Sat, Mar 30, 2024 at 09:25:20AM +0800, GONG, Ruiqi wrote:
> From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
>
> commit dbf4ab821804df071c8b566d9813083125e6d97b upstream.
>
> The SC16IS7XX IC supports a burst mode to access the FIFOs where the
> initial register address is sent ($00), followed by all the FIFO data
> without having to resend the register address each time. In this mode, the
> IC doesn't increment the register address for each R/W byte.
>
> The regmap_raw_read() and regmap_raw_write() are functions which can
> perform IO over multiple registers. They are currently used to read/write
> from/to the FIFO, and although they operate correctly in this burst mode on
> the SPI bus, they would corrupt the regmap cache if it was not disabled
> manually. The reason is that when the R/W size is more than 1 byte, these
> functions assume that the register address is incremented and handle the
> cache accordingly.
>
> Convert FIFO R/W functions to use the regmap _noinc_ versions in order to
> remove the manual cache control which was a workaround when using the
> _raw_ versions. FIFO registers are properly declared as volatile so
> cache will not be used/updated for FIFO accesses.
>
> Fixes: dfeae619d781 ("serial: sc16is7xx")
> Cc: <stable@xxxxxxxxxxxxxxx> # 5.10 5.15
> Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> Link: https://lore.kernel.org/r/20231211171353.2901416-6-hugo@xxxxxxxxxxx
> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> Signed-off-by: GONG, Ruiqi <gongruiqi1@xxxxxxxxxx>
> ---
>
> v2: Backport to both 5.15 and 5.10
>
> The mainline commit dbf4ab821804 ("serial: sc16is7xx: convert from _raw_
> to _noinc_ regmap functions for FIFO") by Hugo has been assigned to be
> CVE-2023-52488, but for stable branches lower than 6.1 there's no
> official backport.
>
> I made up this backport patch for 5.10, and its correctness has been
> confirmed in previous communication with Hugo. Let's publicize it and
> merge it into upstream.
Now queued up, thanks.
greg k-h