Re: [PATCH 3/3] dt-bindings: adc: Document XuanTie TH1520 ADC

[Jonathan Cameron]

On Sat, 30 Mar 2024 04:01:26 +0800
wefu@xxxxxxxxxx wrote:

> From: Wei Fu <wefu@xxxxxxxxxx>
> 
> Document devicetree bindings for the XuanTie TH1520 AP sub-system ADC.
> 
> Signed-off-by: Wei Fu <wefu@xxxxxxxxxx>

Hi.

Few comments inline.

Given Fugang Duan is listed as a maintainer I'd also like an ack ideally
from them.  BTW your +CC list seems a bit random.


Thanks,

Jonathan


> ---
>  .../bindings/iio/adc/thead,th1520.yaml        | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/thead,th1520.yaml b/Documentation/devicetree/bindings/iio/adc/thead,th1520.yaml
> new file mode 100644
> index 000000000000..80890ce62810
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/thead,th1520.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/thead,th1520.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: XuanTie TH1520 Analog to Digital Converter (ADC)
> +
> +maintainers:
> +  - Fugang Duan <duanfugang.dfg@xxxxxxxxxxxxxxxxx>
> +  - Wei Fu <wefu@xxxxxxxxxx>
> +
> +description: |
> +  12-Bit Analog to Digital Converter (ADC) on XuanTie TH1520
> +
> +properties:
> +  compatible:
> +    const: thead,th1520

See the example - doesn't match.  Should be -adc here as well
as this is just part of the SoC.


> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: adc

No objection to having names, but if there is only 1 why is
it required?

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - status

Status doesn't need to be here

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    adc: adc@0xfffff51000 {
> +	compatible = "thead,th1520-adc";

As the bot pointed out, spaces not tabs for these - Please run the suggested
tests in that email before sending a v2.

> +	reg = <0xff 0xfff51000 0x0 0x1000>;
> +	interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&aonsys_clk>;
> +	clock-names = "adc";
> +	/* ADC pin is proprietary,no need to config pinctrl */
> +	status = "disabled";
No need for a status entry in the example.


> +    };