Re: [syzbot] [virtualization?] bpf boot error: WARNING: refcount bug in __free_pages_ok

[Michael S. Tsirkin]

On Sat, Mar 30, 2024 at 08:37:19AM -0700, syzbot wrote:
> Hello,
> 
> syzbot found the following issue on:
> 
> HEAD commit:    6dae957c8eef bpf: fix possible file descriptor leaks in ve..
> git tree:       bpf
> console output: https://syzkaller.appspot.com/x/log.txt?x=14ec025e180000
> kernel config:  https://syzkaller.appspot.com/x/.config?x=7b667bc37450fdcd
> dashboard link: https://syzkaller.appspot.com/bug?extid=689655a7402cc18ace0a
> compiler:       Debian clang version 15.0.6, GNU ld (GNU Binutils for Debian) 2.40
> 
> Downloadable assets:
> disk image: https://storage.googleapis.com/syzbot-assets/94b03853b65f/disk-6dae957c.raw.xz
> vmlinux: https://storage.googleapis.com/syzbot-assets/7375c1b6b108/vmlinux-6dae957c.xz
> kernel image: https://storage.googleapis.com/syzbot-assets/126013ac11e1/bzImage-6dae957c.xz
> 
> IMPORTANT: if you fix the issue, please add the following tag to the commit:
> Reported-by: syzbot+689655a7402cc18ace0a@xxxxxxxxxxxxxxxxxxxxxxxxx
> 
> Key type pkcs7_test registered
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
> io scheduler mq-deadline registered
> io scheduler kyber registered
> io scheduler bfq registered
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: button: Power Button [PWRF]
> input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> ACPI: button: Sleep Button [SLPF]
> ioatdma: Intel(R) QuickData Technology Driver 5.00
> ACPI: \_SB_.LNKC: Enabled at IRQ 11
> virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
> ACPI: \_SB_.LNKD: Enabled at IRQ 10
> virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
> ACPI: \_SB_.LNKB: Enabled at IRQ 10
> virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
> virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
> N_HDLC line discipline registered with maxframe=4096
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
> 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> ACPI: bus type drm_connector registered
> [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
> [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 1
> Console: switching to colour frame buffer device 128x48
> platform vkms: [drm] fb0: vkmsdrmfb frame buffer device
> usbcore: registered new interface driver udl
> brd: module loaded
> loop: module loaded
> zram: Added device: zram0
> null_blk: disk nullb0 created
> null_blk: module loaded
> Guest personality initialized and is inactive
> VMCI host device registered (name=vmci, major=10, minor=118)
> Initialized host personality
> usbcore: registered new interface driver rtsx_usb
> usbcore: registered new interface driver viperboard
> usbcore: registered new interface driver dln2
> usbcore: registered new interface driver pn533_usb
> nfcsim 0.2 initialized
> usbcore: registered new interface driver port100
> usbcore: registered new interface driver nfcmrvl
> Loading iSCSI transport class v2.0-870.
> virtio_scsi virtio0: 1/0/0 default/read/poll queues
> ------------[ cut here ]------------
> refcount_t: decrement hit 0; leaking memory.
> WARNING: CPU: 1 PID: 1 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
> Modules linked in:
> CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1-syzkaller-00160-g6dae957c8eef #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
> RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
> Code: b2 00 00 00 e8 97 cf e9 fc 5b 5d c3 cc cc cc cc e8 8b cf e9 fc c6 05 8e 73 e8 0a 01 90 48 c7 c7 e0 33 1f 8c e8 c7 6b ac fc 90 <0f> 0b 90 90 eb d9 e8 6b cf e9 fc c6 05 6b 73 e8 0a 01 90 48 c7 c7
> RSP: 0000:ffffc90000066e18 EFLAGS: 00010246
> RAX: eee901a1fb7e2300 RBX: ffff888146687e7c RCX: ffff8880166d0000
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
> RBP: 0000000000000004 R08: ffffffff815800c2 R09: fffffbfff1c396e0
> R10: dffffc0000000000 R11: fffffbfff1c396e0 R12: ffffea000502edc0
> R13: ffffea000502edc8 R14: 1ffffd4000a05db9 R15: 0000000000000000
> FS:  0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 000000000e132000 CR4: 00000000003506f0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
>  <TASK>
>  reset_page_owner include/linux/page_owner.h:25 [inline]
>  free_pages_prepare mm/page_alloc.c:1141 [inline]
>  __free_pages_ok+0xc60/0xd90 mm/page_alloc.c:1270
>  make_alloc_exact+0xa3/0xf0 mm/page_alloc.c:4829
>  vring_alloc_queue drivers/virtio/virtio_ring.c:319 [inline]
>  vring_alloc_queue_split+0x20a/0x600 drivers/virtio/virtio_ring.c:1108
>  vring_create_virtqueue_split+0xc6/0x310 drivers/virtio/virtio_ring.c:1158
>  vring_create_virtqueue+0xca/0x110 drivers/virtio/virtio_ring.c:2683
>  setup_vq+0xe9/0x2d0 drivers/virtio/virtio_pci_legacy.c:131
>  vp_setup_vq+0xbf/0x330 drivers/virtio/virtio_pci_common.c:189
>  vp_find_vqs_msix+0x8b2/0xc80 drivers/virtio/virtio_pci_common.c:331
>  vp_find_vqs+0x4c/0x4e0 drivers/virtio/virtio_pci_common.c:408
>  virtio_find_vqs include/linux/virtio_config.h:233 [inline]
>  virtscsi_init+0x8db/0xd00 drivers/scsi/virtio_scsi.c:887
>  virtscsi_probe+0x3ea/0xf60 drivers/scsi/virtio_scsi.c:945
>  virtio_dev_probe+0x991/0xaf0 drivers/virtio/virtio.c:311
>  really_probe+0x2b8/0xad0 drivers/base/dd.c:656
>  __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:798
>  driver_probe_device+0x50/0x430 drivers/base/dd.c:828
>  __driver_attach+0x45f/0x710 drivers/base/dd.c:1214
>  bus_for_each_dev+0x239/0x2b0 drivers/base/bus.c:368
>  bus_add_driver+0x347/0x620 drivers/base/bus.c:673
>  driver_register+0x23a/0x320 drivers/base/driver.c:246
>  virtio_scsi_init+0x65/0xe0 drivers/scsi/virtio_scsi.c:1083
>  do_one_initcall+0x248/0x880 init/main.c:1238
>  do_initcall_level+0x157/0x210 init/main.c:1300
>  do_initcalls+0x3f/0x80 init/main.c:1316
>  kernel_init_freeable+0x435/0x5d0 init/main.c:1548
>  kernel_init+0x1d/0x2b0 init/main.c:1437
>  ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
>  ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
>  </TASK>

We keep seeing this report and I'm stumped.
Jason any idea?

> 
> ---
> This report is generated by a bot. It may contain errors.
> See https://goo.gl/tpsmEJ for more information about syzbot.
> syzbot engineers can be reached at syzkaller@xxxxxxxxxxxxxxxx.
> 
> syzbot will keep track of this issue. See:
> https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> 
> If the report is already addressed, let syzbot know by replying with:
> #syz fix: exact-commit-title
> 
> If you want to overwrite report's subsystems, reply with:
> #syz set subsystems: new-subsystem
> (See the list of subsystem names on the web dashboard)
> 
> If the report is a duplicate of another one, reply with:
> #syz dup: exact-subject-of-another-report
> 
> If you want to undo deduplication, reply with:
> #syz undup