[PATCH 2/3] arm64: dts: qcom: msm8996: add glink-edge nodes
From: Dmitry Baryshkov
Date: Sun Mar 31 2024 - 17:11:31 EST
MSM8996 provides limited glink support, so add corresponding device tree
nodes. For example the following interfaces are provided on db820c:
modem:
2080000.remoteproc:glink-edge.LOOPBACK_CTL_MPSS.-1.-1
2080000.remoteproc:glink-edge.glink_ssr.-1.-1
2080000.remoteproc:glink-edge.rpmsg_chrdev.0.0
adsp:
9300000.remoteproc:glink-edge.LOOPBACK_CTL_LPASS.-1.-1
9300000.remoteproc:glink-edge.glink_ssr.-1.-1
9300000.remoteproc:glink-edge.rpmsg_chrdev.0.0
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 1601e46549e7..7ae499fa7d91 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2453,6 +2453,13 @@ slpi_pil: remoteproc@1c00000 {
status = "disabled";
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "dsps";
+ qcom,remote-pid = <3>;
+ mboxes = <&apcs_glb 27>;
+ };
+
smd-edge {
interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
@@ -2522,6 +2529,13 @@ metadata {
memory-region = <&mdata_mem>;
};
+ glink-edge {
+ interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 15>;
+ };
+
smd-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
@@ -3467,6 +3481,14 @@ adsp_pil: remoteproc@9300000 {
status = "disabled";
+ glink-edge {
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 9>;
+ };
+
+
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
--
2.39.2