[PATCH V4 2/2] rtc-pm8xxx: Correct the value written into the PM8xxx_RTC_ALARM_CLEAR

[jianbin zhang]

Writing 1 to the PM8xxx_RTC_ALARM_CLEAR register is expected to clear
the triggered alarm status. In patch v2, the value written to the
PM8xxx_RTC_ALARM_CLEAR register in the trigger function is incorrectly
written as 0. So correct the value written to PM8xxx_RTC_ALARM_CLEAR
register into 1.

Signed-off-by: jianbin zhang <quic_jianbinz@xxxxxxxxxxx>
---
Changess in v4:
- add the cover letter
- modify the patch to conform to the specification

Changes in v3:
- Correct the value written into the PM8xxx_RTC_ALARM_CLEAR to 1.
- link: https://lore.kernel.org/linux-rtc/20240319191216.GB3796206@xxxxxxxxxxxxxxxxxxxxxxxxxxx/T/#t

Changes in v2:
- Switch to using regmap_update_bits() instead of open coding
  read-modify-write accesses.
- link: https://lore.kernel.org/lkml/20230202155448.6715-4-johan+linaro@xxxxxxxxxx/

Changes in v1:
-link: https://lore.kernel.org/linux-rtc/20230126142057.25715-4-johan+linaro@xxxxxxxxxx/
---
 drivers/rtc/rtc-pm8xxx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index e4e2307445cf..806c99cdac9a 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -391,7 +391,7 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 
 	/* Clear alarm status */
 	rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl2,
-				PM8xxx_RTC_ALARM_CLEAR, 0);
+				PM8xxx_RTC_ALARM_CLEAR, 1);
 	if (rc)
 		return IRQ_NONE;
 

-- 
2.43.2