RE: [v1 0/3] Add i.MX8Q HSIO PHY driver support

[Hongxing Zhu]

> -----Original Message-----
> From: Frank Li <frank.li@xxxxxxx>
> Sent: 2024年3月29日 22:15
> To: Hongxing Zhu <hongxing.zhu@xxxxxxx>
> Cc: vkoul@xxxxxxxxxx; kishon@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx;
> linux-phy@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: Re: [v1 0/3] Add i.MX8Q HSIO PHY driver support
> 
> On Fri, Mar 29, 2024 at 04:09:47PM +0800, Richard Zhu wrote:
> > v1 changes:
> > - Rebase to the 6.9-rc1, and constify of_phandle_args in xlate.
> > No other changes.
> 
> Next time please send to imx@xxxxxxxxxxxxxxx instead of linux-imx@xxxxxxx.
> 
> Frank
Okay, thanks for your review.

Best Regards
Richard Zhu
> 
> >
> > i.MX8Q HSIO module has PHY and mix control regions.
> > This patch-set adds i.MX8Q HSIO PHY driver support, and provides
> > standard PHY phandles that can be used by i.MX8Q PCIe or SATA driver
> > later.
> >
> > [PATCH v1 1/3] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
> > [PATCH v1 2/3] dt-bindings: phy: phy-imx8-pcie: Add binding for [PATCH
> > v1 3/3] phy: freescale: imx8q-hsio: Add i.MX8Q HSIO PHY driver
> >
> > Documentation/devicetree/bindings/phy/fsl,imx8q-hsio.yaml | 143
> ++++++++++++++++++++++++
> > drivers/phy/freescale/Kconfig                             |   8 ++
> > drivers/phy/freescale/Makefile                            |   1 +
> > drivers/phy/freescale/phy-fsl-imx8q-hsio.c                | 518
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++
> > include/dt-bindings/phy/phy-imx8-pcie.h                   |  26 +++++
> > 5 files changed, 696 insertions(+)