[PATCH 4/6] arm64: dts: marvell: cn9130-db: drop wrong unit-addresses
From: Krzysztof Kozlowski
Date: Mon Apr 01 2024 - 10:13:12 EST
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses. Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /ap0_sd_vccq@0)
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
cn9130-db.dtsi:33.33-40.4: Warning (unique_unit_address_if_enabled): /ap0_sd_vccq@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_phy@0)
cn9130-db.dtsi:33.33-40.4: Warning (unit_address_vs_reg): /ap0_sd_vccq@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:42.38-49.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:51.34-54.4: Warning (unit_address_vs_reg): /cp0_usb3_phy@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:56.38-63.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/cn9130-db.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/marvell/cn9131-db.dtsi | 6 +++---
arch/arm64/boot/dts/marvell/cn9132-db.dtsi | 12 ++++++------
3 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 01d6645ddba7..be56a2336265 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -30,7 +30,7 @@ memory@0 {
reg = <0x0 0x0 0x0 0x80000000>;
};
- ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+ ap0_reg_sd_vccq: regulator-1 {
compatible = "regulator-gpio";
regulator-name = "ap0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -39,7 +39,7 @@ ap0_reg_sd_vccq: ap0_sd_vccq@0 {
states = <1800000 0x1 3300000 0x0>;
};
- cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+ cp0_reg_usb3_vbus0: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -48,12 +48,12 @@ cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+ cp0_usb3_0_phy0: usb-phy-1 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus0>;
};
- cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+ cp0_reg_usb3_vbus1: regulator-3 {
compatible = "regulator-fixed";
regulator-name = "cp0-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -62,12 +62,12 @@ cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
- cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+ cp0_usb3_0_phy1: usb-phy-2 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_vbus1>;
};
- cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+ cp0_reg_sd_vccq: regulator-4 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
@@ -77,7 +77,7 @@ cp0_reg_sd_vccq: cp0_sd_vccq@0 {
3300000 0x0>;
};
- cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+ cp0_reg_sd_vcc: regulator-5 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
@@ -87,7 +87,7 @@ cp0_reg_sd_vcc: cp0_sd_vcc@0 {
regulator-always-on;
};
- cp0_sfp_eth0: sfp-eth@0 {
+ cp0_sfp_eth0: sfp-eth-1 {
compatible = "sff,sfp";
i2c-bus = <&cp0_sfpp0_i2c>;
los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index 8f2523786cfb..ad7360c83048 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -18,7 +18,7 @@ aliases {
ethernet4 = &cp1_eth1;
};
- cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+ cp1_reg_usb3_vbus0: regulator-6 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&cp1_xhci0_vbus_pins>;
@@ -29,12 +29,12 @@ cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp1_usb3_0_phy0: cp1_usb3_phy0 {
+ cp1_usb3_0_phy0: usb-phy-3 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp1_reg_usb3_vbus0>;
};
- cp1_sfp_eth1: sfp-eth1 {
+ cp1_sfp_eth1: sfp-eth-2 {
compatible = "sff,sfp";
i2c-bus = <&cp1_i2c0>;
los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 512a4fa2861e..e753cfdac697 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -17,7 +17,7 @@ aliases {
ethernet5 = &cp2_eth0;
};
- cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+ cp2_reg_usb3_vbus0: regulator-7 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci0-vbus";
regulator-min-microvolt = <5000000>;
@@ -26,12 +26,12 @@ cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy0: cp2_usb3_phy0 {
+ cp2_usb3_0_phy0: usb-phy-4 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus0>;
};
- cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+ cp2_reg_usb3_vbus1: regulator-8 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci1-vbus";
regulator-min-microvolt = <5000000>;
@@ -40,12 +40,12 @@ cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
};
- cp2_usb3_0_phy1: cp2_usb3_phy1 {
+ cp2_usb3_0_phy1: usb-phy-5 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus1>;
};
- cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+ cp2_reg_sd_vccq: regulator-9 {
compatible = "regulator-gpio";
regulator-name = "cp2_sd_vcc";
regulator-min-microvolt = <1800000>;
@@ -54,7 +54,7 @@ cp2_reg_sd_vccq: cp2_sd_vccq@0 {
states = <1800000 0x1 3300000 0x0>;
};
- cp2_sfp_eth0: sfp-eth0 {
+ cp2_sfp_eth0: sfp-eth-3 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
--
2.34.1