Re: [PATCH v2 0/7] arm64: dts: qcom: fix description of the Type-C signals
From: Rob Herring
Date: Mon Apr 01 2024 - 12:36:22 EST
On Sun, 31 Mar 2024 06:48:50 +0300, Dmitry Baryshkov wrote:
> Rename the HS link between usb-c-connector and the DWC3 USB controller.
> Add missing graph connection between the QMP PHY and DWC3 USB
> controller.
>
> Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> Changes in v2:
> - Fixed other platforms in addition to sm8250 (Bryan)
> - Link to v1: https://lore.kernel.org/r/20240322-typec-fix-sm8250-v1-0-1ac22b333ea9@xxxxxxxxxx
>
> ---
> Dmitry Baryshkov (7):
> arm64: dts: qcom: sm8250: describe HS signals properly
> arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
> arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
> arm64: dts: qcom: sc8180x: describe USB signals properly
> arm64: dts: qcom: sc8280xp: describe USB signals properly
> arm64: dts: qcom: x1e80100: describe USB signals properly
> arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints
>
> arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 +-
> .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 16 +-
> arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 20 +--
> arch/arm64/boot/dts/qcom/sc8180x.dtsi | 164 ++++++++++-----------
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 20 +--
> .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 20 +--
> arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 54 ++++++-
> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 +-
> .../boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 8 +-
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++-
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 149 ++++++++++++++++++-
> 11 files changed, 340 insertions(+), 147 deletions(-)
> ---
> base-commit: 13ee4a7161b6fd938aef6688ff43b163f6d83e37
> change-id: 20240322-typec-fix-sm8250-33c47a03a056
>
> Best regards,
> --
> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y qcom/qrb5165-rb5.dtb qcom/sc8180x-lenovo-flex-5g.dtb qcom/sc8180x-primus.dtb qcom/sc8280xp-crd.dtb qcom/sc8280xp-lenovo-thinkpad-x13s.dtb qcom/sm8150-hdk.dtb' for 20240331-typec-fix-sm8250-v2-0-857acb6bd88e@xxxxxxxxxx:
arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dtb: clock-controller@af00000: clocks: [[41, 0], [42], [95, 1], [95, 2], [99, 1], [99, 2], [125, 0], [125, 1]] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
arch/arm64/boot/dts/qcom/sc8180x-primus.dtb: clock-controller@af00000: clocks: [[41, 0], [42], [97, 1], [97, 2], [101, 1], [101, 2], [127, 0], [127, 1]] is too long
from schema $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#